Home page Home page Home & Household Supplies Home electrical supplies Back boxes and blanking plates Lever Wire Splitter Quick Connectors 50 pcs Connector 1 Input and 3 Outputs for Cables 0.08 to 2.5 mm² 32 A 250 V Copper Contacts For Electricians
Lever Wire Splitter Quick Connectors 50 pcs Connector 1 Input and 3 Outputs for Cables 0.08 to 2.5 mm² 32 A 250 V Copper Contacts For Electricians

Lever Wire Splitter Quick Connectors 50 pcs Connector 1 Input and 3 Outputs for Cables 0.08 to 2.5 mm² 32 A 250 V Copper Contacts For Electricians

Large pack of fifty wire splitter quick connectors for distributing one wire to three outputs without tools. Copper contacts and a lever for each wire. Full description
In stock
€38.82
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Lever Wire Splitter Quick Connectors 50 pcs Connector 1 Input and 3 Outputs for Cables 0.08 to 2.5 mm² 32 A 250 V Copper Contacts For Electricians

This large pack contains fifty lever-operated wire splitter connectors for quickly distributing one wire to three outputs. The incoming wire is inserted from one side and the three outgoing wires from the opposite side, with each secured by its own lever. The connectors are rated for a nominal current of 32 A and a nominal voltage of 250 V. They are therefore suitable for lighting circuits, socket circuits and connecting small appliances. Installation requires no soldering, screwing or insulating tape.

The connectors have red copper contacts with good conductivity and corrosion resistance. The wires are held in place by a resilient stainless steel clamp, which keeps the connection secure even after the levers have been opened repeatedly. The body is made from flame-retardant plastic with increased resistance to high temperatures. The connector accepts wires with a cross-section of 0.08 to 2.5 mm², including solid single-core wires and flexible stranded wires.

The splitter design saves space in an installation box and replaces bulkier terminal blocks and the practice of connecting several wires under one screw. Each wire has its own opening and lever, so you can disconnect one output without disturbing the others. The connector is suitable for connecting three lights to one switch, distributing a neutral or protective conductor in several directions, or adding further appliances to an existing circuit. There is a small eyelet with a hole on the side of the housing.

  • Type – lever-operated splitter connector with one input and three outputs
  • Nominal current – 32 A
  • Nominal voltage – 250 V
  • Wire cross-section – 0.08 to 2.5 mm²
  • Dimensions – 29.5 x 17.8 x 13.3 mm
  • Contacts – red copper
  • Spring – stainless steel
  • Body – flame-retardant plastic with increased heat resistance
  • Operation – separate lever for each of the four wires
  • Package contents – 50 lever-operated splitter connectors

Installation is straightforward, even for less experienced DIY enthusiasts. First, strip the insulation from the end of the wire, then lift the lever and insert the stripped end into the opening as far as it will go. Finally, fold the lever back down to secure the wire. Connect all three output wires in the same way. To disconnect the connection, simply lift the lever again and pull out the wire. Always disconnect the power supply before working on the electrical installation, and make sure that no bare wire protrudes from the connector body.

Fifty pieces in one pack are enough for a larger electrical renovation or to keep as a long-term stock in a service vehicle. The connectors, with red copper contacts, provide reliable wire splitting without tools and can be reused. The compact housing, measuring 29.5 x 17.8 x 13.3 mm, also fits into smaller installation boxes, keeping connections neat. Simple lever operation saves time with every connection. A practical solution for electricians, maintenance technicians and experienced DIY enthusiasts.

Price incl. VAT €38.82