Home page Home page Home & Household Supplies Home electrical supplies Back boxes and blanking plates Lever-operated Double Branch Connectors 30 pcs Quick Connector 2 x 1 Input and 2 Outputs for 0.08 to 2.5 mm² Cross-section 32 A 250 V Copper For Home
Lever-operated Double Branch Connectors 30 pcs Quick Connector 2 x 1 Input and 2 Outputs for 0.08 to 2.5 mm² Cross-section 32 A 250 V Copper For Home

Lever-operated Double Branch Connectors 30 pcs Quick Connector 2 x 1 Input and 2 Outputs for 0.08 to 2.5 mm² Cross-section 32 A 250 V Copper For Home

Thirty double branch quick connectors for distributing a two-core supply to two appliances. Six levers, copper contacts and tool-free installation. Full description
In stock
€27.90
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Lever-operated Double Branch Connectors 30 pcs Quick Connector 2 x 1 Input and 2 Outputs for 0.08 to 2.5 mm² Cross-section 32 A 250 V Copper For Home

This value pack contains thirty double lever-operated branch connectors. Each connector has two separate channels in a single housing, and each channel distributes one incoming wire to two outputs. This lets you branch both the live and neutral wires at the same time, for example, with a separate lever securing each of the six wires. The connectors are rated for a current of 32 A and a voltage of 250 V. They are therefore suitable for lighting circuits, socket circuits and connecting small appliances. Installation requires no soldering, screwing or insulating tape.

The contact section is made of red copper, which provides good conductivity and resists corrosion. A spring clip made of stainless steel grips the wire and retains its flexibility even after being opened many times. The housing is made of flame-retardant plastic with increased heat resistance. The connector accepts wires with a cross-section of 0.08 to 2.5 mm², including fine-stranded wires and standard installation wires.

The double branch design is suitable wherever you need to distribute a two-core supply to two appliances and do not want to use two separate connectors. The levers for the two channels are different colours, orange and blue, so you can tell at a glance which wires belong together. The connector is suitable for connecting two lights to a single supply or distributing power to LED strips. There is a small eyelet with a hole on the side of the housing.

  • Type – double lever-operated branch connector with two channels, 1 input and 2 outputs
  • Rated current – 32 A
  • Rated voltage – 250 V
  • Wire cross-section – 0.08 to 2.5 mm²
  • Dimensions – 31.5 x 23 x 13.5 mm
  • Contacts – red copper
  • Spring – stainless steel
  • Body – flame-retardant plastic with increased heat resistance
  • Operation – six levers, one for each wire
  • Package contents – 30 double lever-operated branch connectors, 2 x 1 input and 2 outputs

Connection is simple. Strip the insulation from the end of the wire, lift the lever, insert the wire into the opening as far as it will go and lower the lever. Connect both output wires for that channel in the same way, then repeat the whole process for the second channel. To change the connection, simply lift the lever again and pull out the wire. Always switch off the circuit breaker for the relevant circuit before starting work, and check that the entire stripped end of the wire is inserted inside the connector.

The pack of thirty is enough for rewiring an entire flat or keeping as a supply in the workshop. One connector branches two wires at the same time and saves space in the junction box. Connectors with red copper contacts provide a reliable tool-free connection and can be reused. The housing, measuring 31.5 x 23 x 13.5 mm, fits into a standard installation box or under a light fitting cover. A practical consumable for the workshop, home or service case.

Price incl. VAT €27.90