Home page Home page Home & Household Supplies Home electrical supplies Back boxes and blanking plates Lever Operated Branch Quick Connectors 50 pcs Connector 1 Input and 5 Outputs for Cables 0.08 to 2.5 mm² 32 A 250 V Copper Contacts For Electricians
Lever Operated Branch Quick Connectors 50 pcs Connector 1 Input and 5 Outputs for Cables 0.08 to 2.5 mm² 32 A 250 V Copper Contacts For Electricians

Lever Operated Branch Quick Connectors 50 pcs Connector 1 Input and 5 Outputs for Cables 0.08 to 2.5 mm² 32 A 250 V Copper Contacts For Electricians

Large pack of fifty lever-operated branch connectors for distributing one conductor to five outputs. Tool-free connection with copper contacts and a spring. Full description
In stock
€51.05
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Lever Operated Branch Quick Connectors 50 pcs Connector 1 Input and 5 Outputs for Cables 0.08 to 2.5 mm² 32 A 250 V Copper Contacts For Electricians

This large pack contains fifty lever-operated branch connectors for distributing one conductor to five outputs. The incoming conductor is inserted from one side and the five outgoing conductors from the opposite side, with each secured by its own lever. The connection can be disconnected at any time without damaging the conductor. The connectors are rated for a nominal current of 32 A and a nominal voltage of 250 V. They are therefore suitable for lighting circuits, socket circuits and connecting small appliances. Installation requires no soldering, screwing or insulating tape.

The contacts inside the housing are made of red copper, which conducts electricity well and resists corrosion. The conductors are pressed by a spring clip made of stainless steel, which holds the connection firmly even after the levers have been opened repeatedly. The connector body is made of flame-retardant plastic with enhanced heat resistance. The openings accommodate conductors with a cross-section of 0.08 to 2.5 mm², both solid conductors and flexible stranded wires.

The branching design replaces bulkier terminal blocks and the practice of connecting several conductors under one screw. Each conductor has its own opening and lever, so you can disconnect one output without affecting the others. The connector is suitable for connecting a larger number of lights to one switch, distributing a neutral or protective conductor in up to five directions, or adding further appliances to an existing circuit. There is a small eyelet with a hole on the side of the housing.

  • Type – lever-operated branch connector with one input and five outputs
  • Nominal current – 32 A
  • Nominal voltage – 250 V
  • Conductor cross-section – 0.08 to 2.5 mm²
  • Dimensions – 29.5 x 28 x 13.3 mm
  • Contacts – red copper
  • Spring – stainless steel
  • Body – flame-retardant plastic with enhanced heat resistance
  • Operation – a separate lever for each of the six conductors
  • Package contents – 50 pcs lever-operated branch connectors with 1 input and 5 outputs

Connection takes three steps. Strip the insulation from the end of the conductor, lift the lever for the relevant opening and insert the conductor as far as it will go. Then lower the lever to secure the conductor. Connect all five output conductors in the same way. You can disconnect the connection at any time by lifting the lever and pulling out the conductor. Always switch off the power and check that no stripped ends protrude from the connector before carrying out any work on the electrical installation.

Fifty pieces in one pack are enough for a larger electrical installation renovation or to keep as a long-term supply in a service vehicle. One incoming conductor can be distributed in up to five directions without tools or an additional terminal block. The contacts made of red copper ensure a reliable connection, while the levers allow it to be dismantled at any time. The body, measuring 29.5 x 28 x 13.3 mm, takes up little space in an electrical box, keeping connections neat. This is a cost-effective solution for electricians, installation companies and building maintenance.

Price incl. VAT €51.05