Home page Home page Home & Household Supplies Home electrical supplies Back boxes and blanking plates Lever-Operated Branch Connectors 10 pcs Connector 1 Input and 5 Outputs for 0.08 to 2.5 mm² Conductors 32 A 250 V Copper Contacts Screwless
Lever-Operated Branch Connectors 10 pcs Connector 1 Input and 5 Outputs for 0.08 to 2.5 mm² Conductors 32 A 250 V Copper Contacts Screwless

Lever-Operated Branch Connectors 10 pcs Connector 1 Input and 5 Outputs for 0.08 to 2.5 mm² Conductors 32 A 250 V Copper Contacts Screwless

Lever-operated branch connectors distribute one conductor in up to five directions without soldering. Copper contacts and a stainless steel spring provide a safe, tidy connection. Full description
In stock
€15.68
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Lever-Operated Branch Connectors 10 pcs Connector 1 Input and 5 Outputs for 0.08 to 2.5 mm² Conductors 32 A 250 V Copper Contacts Screwless

The pack contains ten lever-operated branch connectors for distributing one conductor to five outputs. The incoming conductor is inserted from one side and the five outgoing conductors from the opposite side, with each secured by its own lever. The connection can be disconnected at any time without damaging the conductor. The connectors are rated for a current of 32 A and a voltage of 250 V. They are therefore suitable for lighting circuits, socket circuits and connecting small appliances. Installation requires no soldering, screws or insulating tape.

Inside each connector are red copper contacts with good conductivity and corrosion resistance. The conductors are held in place by a stainless steel spring clamp, which keeps the connection secure even after the levers have been opened repeatedly. The housing is made from flame-retardant plastic with increased resistance to high temperatures. The connector accepts conductors with a cross-sectional area of 0.08 to 2.5 mm², including both solid single-core conductors and flexible stranded wires.

The branching design replaces bulkier terminal blocks and the practice of connecting several conductors under one screw. Each conductor has its own port and lever, so you can disconnect one output without affecting the others. The connector is suitable for connecting a larger number of lights to one switch, distributing a neutral or protective conductor in up to five directions, or adding further appliances to an existing circuit. There is a small eyelet with a hole on the side of the housing.

  • Type – lever-operated branch connector with one input and five outputs
  • Rated current – 32 A
  • Rated voltage – 250 V
  • Conductor cross-section – 0.08 to 2.5 mm²
  • Dimensions – 29.5 x 28 x 13.3 mm
  • Contacts – red copper
  • Spring – stainless steel
  • Housing – flame-retardant plastic with increased heat resistance
  • Operation – a separate lever for each of the six conductors
  • Package contents – 10 pcs lever-operated branch connectors with 1 input and 5 outputs

Installation is straightforward, even for less experienced DIY enthusiasts. First, strip the insulation from the end of the conductor, then lift the lever and insert the stripped end into the port as far as it will go. Finally, lower the lever to secure the conductor. Connect all five output conductors in the same way. To disconnect the connection, simply lift the lever again and pull out the conductor. Always disconnect the power supply before working on electrical installations, and make sure that no bare conductor protrudes from the connector housing.

The ten-piece pack is ideal for smaller electrical installation jobs in a flat, garage or holiday home. You can distribute one supply to up to five directions without tools or an additional terminal block. The red copper contacts provide a reliable connection without tools, and the connectors can be reused. The compact housing, measuring 29.5 x 28 x 13.3 mm, also fits into smaller installation boxes. A practical solution for electricians, maintenance workers and experienced DIY enthusiasts.

Price incl. VAT €15.68