Home page Home page PC & Laptop Accessories Other Electronics LCD Display Module 1.69" IPS 240 x 280 px SPI Controller ST7789V2 262K Colours Power Supply 3.3 V and 5 V For Arduino ESP32 and Raspberry Pi
LCD Display Module 1.69" IPS 240 x 280 px SPI Controller ST7789V2 262K Colours Power Supply 3.3 V and 5 V For Arduino ESP32 and Raspberry Pi

LCD Display Module 1.69" IPS 240 x 280 px SPI Controller ST7789V2 262K Colours Power Supply 3.3 V and 5 V For Arduino ESP32 and Raspberry Pi

Colour IPS display with a sharp 240 x 280 px image and SPI interface for custom projects with microcontrollers. 8-wire connecting cable included. Full description
In stock
€25.72
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
LCD Display Module 1.69" IPS 240 x 280 px SPI Controller ST7789V2 262K Colours Power Supply 3.3 V and 5 V For Arduino ESP32 and Raspberry Pi

This small colour LCD display module is designed for electronic projects where you need to display text, numbers, icons or simple graphics. The 1.69-inch diagonal and 240 x 280 pixel resolution ensure a sharp, easy-to-read image even on a very small area. The panel uses IPS technology, which offers wide viewing angles and faithful colour reproduction. The display can show up to 262 thousand colours, making it suitable for clocks, sensor readings, simple menus and custom graphical interfaces. The module connects to popular Arduino, ESP32 and Raspberry Pi platforms.

Communication takes place via a 4-wire SPI interface, which is supported by most standard microcontrollers and single-board computers. Image rendering is handled by the ST7789V2 controller, for which commonly available libraries and sample programs exist. A logic level shifter is fitted to the printed circuit board, allowing the module to be powered and controlled at either 3.3 V or 5 V. This means you do not need to deal with additional components or complicated wiring. Connection is provided by an 8-pin connector, into which the included connecting cable is inserted. The individual wires are colour-coded, making it easy to identify which wire belongs to each signal.

  • Type – colour LCD display module
  • Diagonal – 1.69"
  • Panel technology – IPS
  • Resolution – 240 x 280 px
  • Number of colours – 262K
  • Controller – ST7789V2
  • Interface – 4-wire SPI
  • Operating voltage – 3.3 V and 5 V
  • Display area size – 27.97 x 32.63 mm
  • Module dimensions – 31.5 x 39 mm
  • Pixel size – 0.11655 x 0.11655 mm
  • Pins – VCC GND DIN CLK CS DC RST and BL
  • Compatibility – Arduino ESP32 and Raspberry Pi
  • Package contents – display module and 8-wire connecting cable

When connecting the module, connect the VCC and GND pins to the power supply and the DIN, CLK, CS, DC and RST signals to the corresponding SPI pins on your development board. The BL pin is used to control the display backlight. Handle the module with care, do not expose it to moisture and always disconnect the power before working on the wiring. Protect the display from pressure and scratches, preferably with a suitable cover or frame for your project.

The 1.69-inch display module is a practical addition for anyone building their own microcontroller-based device. Thanks to the SPI interface, you can connect it to Arduino, ESP32 or Raspberry Pi, while support for both 3.3 V and 5 V makes wiring easier without additional converters. It is suitable for smartwatches, weather stations, measuring instruments, temperature displays or a small panel showing the status of a computer. Its compact dimensions also allow it to be installed in small enclosures. The included cable with colour-coded wires speeds up initial connection and testing.

Price incl. VAT €25.72