Home page Home page PC & Laptop Accessories Other Electronics LCD Display HAT 1.3" IPS 240 x 240 for Raspberry Pi SPI Interface ST7789 Controller Joystick and 3 Buttons 40-pin GPIO Blue Board For Projects
LCD Display HAT 1.3" IPS 240 x 240 for Raspberry Pi SPI Interface ST7789 Controller Joystick and 3 Buttons 40-pin GPIO Blue Board For Projects

LCD Display HAT 1.3" IPS 240 x 240 for Raspberry Pi SPI Interface ST7789 Controller Joystick and 3 Buttons 40-pin GPIO Blue Board For Projects

Colour 1.3" IPS display with 240 x 240 px resolution, which connects directly to the 40-pin GPIO of a Raspberry Pi. SPI, ST7789 controller, joystick and three buttons for control. Full description
In stock
€36.64
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
LCD Display HAT 1.3" IPS 240 x 240 for Raspberry Pi SPI Interface ST7789 Controller Joystick and 3 Buttons 40-pin GPIO Blue Board For Projects

This compact HAT-format LCD display is designed for Raspberry Pi boards and connects directly to the standard 40-pin GPIO connector. The 1.3-inch screen uses IPS technology, offering wide viewing angles and a clear image even when viewed from the side. The 240 x 240 pixel resolution ensures sharp display of text, icons, graphs and simple animations on a small screen. The display communicates via the SPI interface and has a built-in controller, so it uses few pins and is easy to connect. It is ideal wherever you want to add a small custom control interface or status panel to your Raspberry Pi.

In addition to the screen itself, the module board features a five-way joystick and three separate buttons connected to GPIO pins, which you can use in your own programmes to control menus, switch screens or trigger actions. The joystick detects movement up, down, left and right, as well as a press. The display shows RGB colours with a depth of 65K colours and has LED backlighting, controlled via a separate pin. Development resources and example programmes for Raspberry Pi are available for the ST7789 controller, so you can get started even without in-depth knowledge of electronics.

  • Diagonal – 1.3"
  • Panel type – IPS with a wide viewing angle
  • Resolution – 240 x 240 px
  • Colour – RGB, 65K colours
  • Controller – ST7789
  • Interface – SPI
  • Backlighting – LED
  • Operating voltage – 3.3 V
  • Connector – standard 40-pin GPIO for Raspberry Pi boards
  • Controls – 1 five-way joystick and 3 buttons
  • Board dimensions – 65 x 30.2 mm
  • Mounting hole spacing – 58 x 23.2 mm
  • Board colour – blue
  • Package contents – 1 LCD Display HAT 1.3" and a mounting kit for Raspberry Pi (2 screws, 2 spacers and 2 nuts)

Simply fit the module onto the GPIO pins and secure it firmly to the Raspberry Pi board using the supplied spacers and screws. The Raspberry Pi board itself and the power cable are not included. When handling the module, hold it by the edges of the board, do not press on the screen and only fit it when the Raspberry Pi is switched off. Clean the screen with a soft, dry cloth without solvents.

The small colour HAT display is a practical accessory for educational projects, home automation, system status monitoring or your own gaming and multimedia experiments. Thanks to its format, which matches the width of the Raspberry Pi board, you can create a compact setup without loose cables or jumper wires. The SPI interface is easy to configure, and the controls directly on the board save space and additional components. The 65 x 30.2 mm dimensions make it easy to fit the module into your own box or enclosure. It is a handy solution for anyone who wants to give their Raspberry Pi its own small screen with controls.

Price incl. VAT €36.64