Home page Home page Auto & Moto Car Care Products Car Protection & Restoration Large Paintless Dent Repair Kit Gold Bridge with Sliding Feet Pulling Bridge 20 W Glue Gun Hammer and Bag
Large Paintless Dent Repair Kit Gold Bridge with Sliding Feet Pulling Bridge 20 W Glue Gun Hammer and Bag

Large Paintless Dent Repair Kit Gold Bridge with Sliding Feet Pulling Bridge 20 W Glue Gun Hammer and Bag

Comprehensive equipment for repairing dents in car bodywork: a lever bridge and a bridge with suction feet, a glue gun, a hammer with a knockdown pen and attachments. Full description
In stock
€75.94
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Large Paintless Dent Repair Kit Gold Bridge with Sliding Feet Pulling Bridge 20 W Glue Gun Hammer and Bag

This large kit is designed for more demanding paintless dent repairs on car bodywork. It contains two pulling tools – a gold lever bridge with sliding feet and a pulling bridge with a swivel head and two support feet. A 20 W glue gun powered from a 110–240 V mains supply is used to attach the pulling tabs. The kit is complemented by a hammer with a knockdown pen and a set of screw-on tips for levelling raised areas. The pack includes a large selection of blue and red pulling tabs and glue sticks with a diameter of 7 mm and a length of 27 cm in three colours.

The sliding feet on the gold bridge can be adjusted to suit the size of the dent – spread them wide for a large dent or move them closer to the centre for a small one. The pulling bridge with a swivel head pulls the tab smoothly by turning, making it suitable for longer dents. The bridge also comes with black tabs with rubber faces on metal shanks. Everything can be stored in the included zip-up bag.

  • Purpose – paintless repair of dents and hail damage to car bodywork
  • Pulling bridge – gold lever lifter with spring and sliding feet
  • Pulling bridge – metal bar with two support feet and a swivel head
  • Glue gun – 20 W power and 110–240 V 50/60 Hz supply
  • Knockdown pen – red pen with screw-on tips in various shapes
  • Pulling tabs – blue and red plastic tabs in various shapes and sizes
  • Glue sticks – 7 mm in diameter and 27 cm long, in yellow, white and black
  • Package contents – 1 gold lever pulling bridge, 1 pulling bridge, 1 20 W glue gun, 1 hammer, 1 red knockdown pen with a set of screw-on tips, black tabs with rubber faces, blue and red plastic pulling tabs, yellow, white and black glue sticks, 2 yellow plastic scrapers, 1 spray bottle, 1 blue cloth, 1 instruction manual and 1 bag

Before repairing, clean and degrease the area. Apply hot-melt glue to the chosen tab, press it into the centre of the dent and allow it to set. Then fit the tab into the lever bridge or pulling bridge and gradually pull out the dent. Level raised areas with light taps using the knockdown pen and hammer. Remove any glue residue with the plastic scraper after spraying the area with alcohol from the bottle, then wipe the surface with the cloth.

This large kit is suitable for experienced DIY enthusiasts and anyone who wants to keep equipment at home for most common car dents. The combination of a lever bridge and a pulling bridge allows you to repair small hail dents as well as longer dents on doors or wings. The 20 W glue gun and three types of glue sticks are ready for immediate use. The knockdown pen and hammer help you finish the job, leaving the metal smooth after repair. Thanks to the zip-up bag, you can keep all the equipment neatly stored in one place.

Price incl. VAT €75.94