Home page Home page PC & Laptop Accessories PC Components CPU coolers and fans JUMPEAK CS120 ARGB Reverse Airflow PC Case Fan 120 x 120 x 25 mm Reverse Airflow PWM 4-pin Modular for Radiator
JUMPEAK CS120 ARGB Reverse Airflow PC Case Fan 120 x 120 x 25 mm Reverse Airflow PWM 4-pin Modular for Radiator

JUMPEAK CS120 ARGB Reverse Airflow PC Case Fan 120 x 120 x 25 mm Reverse Airflow PWM 4-pin Modular for Radiator

120 mm reverse airflow ARGB fan with PWM control. Connects to other CS120 fans in a series of 240 or 360 mm without cables. Full description
In stock
Colour:
€35.33
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
JUMPEAK CS120 ARGB Reverse Airflow PC Case Fan 120 x 120 x 25 mm Reverse Airflow PWM 4-pin Modular for Radiator

The JUMPEAK CS120 ARGB reverse airflow fan has an airflow direction that is reversed compared with the standard version. It is therefore suitable for positions where you want the illuminated side of the fan to face into the case while maintaining the desired airflow direction, typically at the bottom of the case or on the side panel. It measures 120 x 120 x 25 mm, and its seven blades deliver an airflow of up to 59.6 CFM. The motherboard controls its speed, ranging from 800 to 1800 rpm, via a 4-pin PWM connector. The lighting consists of 22 addressable LEDs powered by a 5 V 3-pin ARGB connector.

The frame has latches and contacts on the sides for cable-free connection. You can therefore clip the fan to other CS120 series fans to create a 240 or 360 mm assembly, with power and lighting passing through the connection and just one cable running to the motherboard. The HDB hydrodynamic bearing is designed for a lifespan of 50,000 hours. The reverse version has a static pressure of 1.9 mm H2O, and noise at full speed does not exceed 29.4 dBA.

  • Model – JUMPEAK CS120 ARGB modular fan
  • Design – reverse version with reversed airflow direction
  • Dimensions – 120 x 120 x 25 mm
  • Speed – 800–1800 rpm with PWM control
  • Airflow – 59.6 CFM
  • Static pressure – 1.9 mm H2O
  • Noise level – max. 29.4 dBA
  • Bearing – HDB with a lifespan of 50,000 hours
  • Lighting – 22 5 V ARGB LEDs
  • Power – fan 12 V 0.2 A 2.4 W and LEDs 5 V 1.1 A 5.5 W
  • Connectors – 4-pin PWM and 5 V 3-pin ARGB
  • Use – PC case and water-cooling radiator
  • Package contents – 1 CS120 ARGB reverse airflow fan and cable with 4-pin PWM and 3-pin ARGB connectors

The reverse airflow fan fits standard 120 mm fan mounts in a case or on a radiator in the same way as a regular fan, but the air flows in the opposite direction. When planning your setup, check which way the air needs to flow in each position. The lighting is controlled using motherboard software that supports 5 V ARGB, or a separate ARGB controller, which must be set to at least 22 LEDs per fan. Do not dismantle the blades; remove dust with a brush or compressed air.

The reverse airflow CS120 is particularly suitable for cases where you want the illuminated front face of the fans to be visible from all sides. Its 120 mm size fits standard fan mounts in cases and radiators. PWM control keeps the speed low during light use and increases it under heavier loads. You can add more CS120 series fans at any time and connect them into a single assembly. The illuminated strips around the frame can be matched with the other ARGB components in your computer.

Price incl. VAT €35.33