Home page Home page PC & Laptop Accessories PC Components CPU coolers and fans JUMPEAK CS120 ARGB 3-Pack 120 mm Fans Modular 360 mm Connection 800–1800 RPM PWM For Radiator
JUMPEAK CS120 ARGB 3-Pack 120 mm Fans Modular 360 mm Connection 800–1800 RPM PWM For Radiator

JUMPEAK CS120 ARGB 3-Pack 120 mm Fans Modular 360 mm Connection 800–1800 RPM PWM For Radiator

Three modular 120 mm ARGB fans connect without cables to form a 360 mm assembly. PWM control, 66 LEDs and a single cable to the motherboard. Full description
In stock
Colour:
€72.01
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
JUMPEAK CS120 ARGB 3-Pack 120 mm Fans Modular 360 mm Connection 800–1800 RPM PWM For Radiator

The pack contains three modular JUMPEAK CS120 ARGB fans in the standard version, with normal airflow direction. Each fan measures 120 x 120 x 25 mm, and connecting all three creates an assembly for a 360 mm radiator or three consecutive fan positions in a computer case. The seven blades on each fan deliver airflow of up to 61.7 CFM at 1800 RPM. Speed, ranging from 800 to 1800 RPM, is controlled by the motherboard via a 4-pin PWM connector. Each fan has 22 addressable LEDs, giving the complete pack a total of 66 illuminated LEDs.

The fans clip together using side locks with contacts, allowing for cable-free connection. Power and lighting signals pass through the connections from one fan to the next, so only one cable runs to the motherboard, even for all three fans. This reduces the number of wires inside the case and makes installation quick. The HDB hydrodynamic bearings are designed for a service life of 50,000 hours. Noise from a single fan at full speed does not exceed 26.3 dBA, and the static pressure of 2.1 mm H2O also makes it suitable for radiator fins.

  • Model – JUMPEAK CS120 ARGB modular fan
  • Version – standard version with normal airflow direction
  • Dimensions of one fan – 120 x 120 x 25 mm
  • Assembly – 3 fans connected to form a 360 mm length
  • Speed – 800–1800 RPM with PWM control
  • Airflow – 61.7 CFM per fan
  • Static pressure – 2.1 mm H2O
  • Noise level – max. 26.3 dBA per fan
  • Bearing – HDB with a service life of 50,000 hours
  • Lighting – 22 5 V ARGB LEDs per fan, 66 LEDs in the pack
  • Connectors – 4-pin PWM and 5 V 3-pin ARGB
  • Use – PC case and 360 mm water-cooling radiator
  • Package contents – 3 CS120 ARGB fans and a cable with 4-pin PWM and 3-pin ARGB connectors

Install the connected trio on a 360 mm radiator or in the front or top of a case with three positions for 120 mm fans. Control the lighting using motherboard software that supports 5 V ARGB or a separate ARGB controller. In the control software, set at least 66 LEDs for the three-fan pack; otherwise, only some of the light strips will illuminate. Do not dismantle the blades, as removing them may damage the fan. Remove dust with a brush or compressed air.

The three-fan CS120 pack is suitable for cooling a 360 mm radiator in high-performance gaming systems, as well as for drawing fresh air into the front of a spacious case. The 120 mm fans fit standard positions in cases and radiators. A single cable to the motherboard keeps the inside of the case tidy. PWM control keeps speeds low during everyday tasks and increases them during demanding games. The continuous light strip across the three connected frames stands out behind a transparent side panel.

Price incl. VAT €72.01