Home page Home page PC & Laptop Accessories PC Components CPU coolers and fans JUMPEAK CS120 ARGB 120 mm Reverse Fan Set of 3 and Nollie 8CH Controller Reverse Airflow 360 mm PWM SignalRGB
JUMPEAK CS120 ARGB 120 mm Reverse Fan Set of 3 and Nollie 8CH Controller Reverse Airflow 360 mm PWM SignalRGB

JUMPEAK CS120 ARGB 120 mm Reverse Fan Set of 3 and Nollie 8CH Controller Reverse Airflow 360 mm PWM SignalRGB

Three 120 mm reverse-flow ARGB fans for a 360 mm setup and an 8-channel Nollie lighting controller with full SignalRGB support. Full description
In stock
Colour:
€109.56
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
JUMPEAK CS120 ARGB 120 mm Reverse Fan Set of 3 and Nollie 8CH Controller Reverse Airflow 360 mm PWM SignalRGB

The set contains three modular JUMPEAK CS120 ARGB fans in a reverse version, with reversed airflow, and a separate Nollie 8CH lighting controller. Reverse fans are ideal where the illuminated front face needs to face into the case while the air flows in the opposite direction to a standard version, for example at the bottom of the case or on a side panel. Each fan measures 120 x 120 x 25 mm, and when connected, the three fans form a 360 mm radiator setup. The Nollie controller has 8 independent channels for 5 V 3-pin ARGB fans and other ARGB accessories.

The fans connect to each other using side locks with contacts, allowing cable-free connection, and only one cable runs from them to the controller or motherboard. Each reverse fan delivers an airflow of up to 59.6 CFM at a static pressure of 1.9 mm H2O, with noise levels not exceeding 29.4 dBA at full speed. Each fan has 22 addressable LEDs, giving a total of 66 across the set. The controller supports up to 126 LEDs per port and up to 1,000 LEDs in total. It is powered from the power supply via a SATA connector and receives data through an internal 9-pin USB connector on the motherboard.

  • Fans – 3 x JUMPEAK CS120 ARGB, reverse airflow
  • Dimensions of each fan – 120 x 120 x 25 mm
  • Setup – 3 fans connected to form a 360 mm length
  • Speed – 800–1800 rpm with PWM control
  • Airflow – 59.6 CFM per fan
  • Static pressure – 1.9 mm H2O
  • Noise level – max. 29.4 dBA per fan
  • Fan lighting – 22 x 5 V ARGB LEDs per fan
  • Controller – Nollie 8CH with 8 x 5 V 3-pin ARGB channels
  • Controller capacity – 126 LEDs per port, 1,000 LEDs in total
  • Controller connection – SATA power and data via 9-pin USB on the motherboard
  • Software – SignalRGB and OpenRGB
  • Package contents – 3 reverse CS120 ARGB fans, cable with 4-pin PWM and 3-pin ARGB connectors, and Nollie 8CH controller

Install the connected reverse fans in three 120 mm fan slots or on a 360 mm radiator. Before installation, check which direction the air needs to flow in that position, as the reverse version pushes it in the opposite direction to the standard version. Connect the fans' ARGB cable to a port on the Nollie controller and set it to at least 66 LEDs in the software. You can use the free ports for other ARGB accessories. Do not dismantle the fan blades; remove dust with a brush or compressed air.

This set is designed for cases with transparent side panels, where you want to see the illuminated front face even when the fans are facing the opposite way, while controlling the lighting of all components with a single controller. The 120 mm fans fit standard case slots and radiators. The controller, certified for SignalRGB and compatible with OpenRGB, synchronises effects across accessories from different manufacturers. PWM control keeps fan speeds low during everyday use and increases them under load.

Price incl. VAT €109.56