LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Auto & Moto Garage Equipment Welding Supplies HXP-105 Soldering Flux 30 ml Non-Washable Bottle 10.3 x 3 cm Conical Tip Transparent For Stainless Steel Copper and Nickel Battery Strips
HXP-105 Soldering Flux 30 ml Non-Washable Bottle 10.3 x 3 cm Conical Tip Transparent For Stainless Steel Copper and Nickel Battery Strips

HXP-105 Soldering Flux 30 ml Non-Washable Bottle 10.3 x 3 cm Conical Tip Transparent For Stainless Steel Copper and Nickel Battery Strips

It handles galvanised steel and nickel strips where regular flux fails. The conical tip dispenses droplets precisely, and residues do not need to be rinsed with alcohol. Full description
In stock
€27.90
Safe shopping Safe shopping
Overview
HXP-105 Soldering Flux 30 ml Non-Washable Bottle 10.3 x 3 cm Conical Tip Transparent For Stainless Steel Copper and Nickel Battery Strips

The liquid soldering flux removes oxides from soldered surfaces, improves the wetting of solder, and reduces the risk of cold joints. The bottle volume is 30 ml, which, when dispensing by drops, is sufficient for hundreds of joints in both home and service practice. The flux is non-washable, so residues after soldering do not need to be removed with isopropyl alcohol, and the board can go straight back into the device. The composition consists of water, an active ingredient, and an antioxidant that prevents the re-oxidation of the cleaned surface. The transparent bottle with a conical tip allows you to monitor the remaining amount and apply the flux precisely.

  • Suitable materials — the flux is intended for 18650 batteries, galvanised steel, stainless steel, copper, iron, and nickel strips, thus for surfaces where regular flux does not adhere.
  • Conical tip — the tapered neck dispenses a droplet precisely to one spot and does not spill onto adjacent terminals.
  • No rinsing required — the non-washable composition saves time and cleaning agent consumption during servicing.
  • Electronics repairs — you will use it when soldering SMD components, BGA housings, integrated circuits, and printed circuit boards.
  • Bottle dimensions — the bottle measures 10.3 x 3 cm, so it fits into a service bag and a toolbox.
  • Economical dosing — one drop covers a standard soldering pad, so consumption is low.
  • Water-soluble base — the composition is based on a water base, not aggressive solvents.
  • Contents of the package — 1x 30 ml soldering flux bottle

The flux will be used by service technicians, electronics repairers, and DIY enthusiasts who assemble battery packs and solder nickel strips themselves. The antioxidant in the composition slows down the re-oxidation of the surface, giving you more time to apply the tip than with purely rosin-based fluxes. It should be applied to a clean and degreased surface, as solder does not adhere to grease even with flux. When working, we recommend ventilating the area, as the flux releases vapours when heated. After finishing work, close the bottle to prevent the contents from drying out.

Price incl. VAT €27.90