High Pressure Membrane Pump 12 V 120 W 1.0 MPa with a Flow Rate of 8 L per Minute and M18 x 1.5 mm Thread
You already have the maximum available quantity in your cart.
Washing vehicles, spraying in the garden, or farm work all require pressure and a constant flow. This high-pressure membrane pump operates at 12 V, draws 10 A, and its maximum power is 120 W. The protective pressure at the outlet is 1.0 MPa, which is 10 bar, and the maximum flow rate is 8 litres per minute. This equates to approximately 480 litres of water per hour, and the pump can draw water from a depth of 2 to 3 m. The body is entirely black, featuring two membrane heads and four feet with holes on both sides.
Key Features:
- Pressure 1.0 MPa — protective pressure at the outlet corresponds to 10 bar as per the label
- Flow Rate 8 l per Minute — approximately 480 litres of water per hour of pump operation
- Maximum Power 120 W — motor designed for higher pressure and longer operation
- Current Draw 10 A — current consumption stated on the pump label as per the manufacturer
- Suction Height 2 to 3 m — the pump can draw water from a lower tank
- Inlet 10 mm — left suction spigot for attaching a thinner supply hose from the tank
- Outlet 17 mm — right discharge spout with thread for pressure hose
- M18 x 1.5 mm Thread — thread size on the discharge spout
- Two Membrane Heads — the pumping section consists of a pair of chambers placed side by side
- Power Supply 12 V — operates from a car battery, inverter, or DC source
- Four Mounting Feet — plastic feet with holes on both sides of the body
- Power Wires — red and black wires extending from the top of the motor
- Cooling Grooves — longitudinal ventilation slots around the motor casing
- Farm Use — the pump is intended for agriculture, gardening, and vehicle washing
- Off-Grid Operation 230 V — the pump operates on low DC voltage from a source
- Black Finish — the entire body of the motor and both pumping heads are in black
Contents of the Package:
- 1x high-pressure membrane pump
The pump is designed for tasks where pressure is the priority, not just the volume of water pumped. The protective pressure of 10 bar is the main parameter, as it determines the effectiveness of the nozzle during washing and spraying. Suction height of 2 to 3 m allows the pump to be positioned higher than the water source, for example, above a barrel. The 10 mm inlet and the discharge spout with M18 x 1.5 mm thread determine which hoses and fittings will fit. Once the hoses and two wires are connected to a 12 V source, the pump is ready for operation.
Seller: POLARDOS
Dispatched within 1 working day (Mon–Fri) – orders paid for by 14:00 Irish time are processed on the same working day.
Availability: In stock
Transit: 5–13 working days – transit takes place on working days (Mon–Fri).
In total, please allow 5–14 working days from payment of your order.
Delivery is only possible to addresses in Ireland.
Delivery to address: €1.59
Returns
Deadline: 30 days from receipt of the goods, without giving any reason
How: notify us of your withdrawal at info@lunzo.ie and send the goods by post to the returns address:
Rotonda Rene Descartes, Parcela 101 – Nave 3
28070 Alcala de Henares, Madrid
Spain
Once you have sent the parcel, send us the proof of dispatch with the tracking number to info@lunzo.ie – this lets us process your return as quickly as possible and refund you without waiting for the parcel to arrive.
Product condition: you can also return goods that have been used or unpacked, or that no longer have their original packaging or tags
Costs: you pay the postage for sending the goods back to Spain; we charge no return fee
Refund: within 14 days of receiving your notice of withdrawal; we may withhold the refund until the goods have arrived back or until you provide proof that you have sent them
Exchanges
Deadline: 30 days from receiving your parcel (exchange for a different size, colour or variant)
How: write to us at info@lunzo.ie, giving your order number and the variant you want – once we have checked that it is available, we will send you instructions for the exchange, including the address to which you should send the original item
Costs: you pay to send the original item back; the new variant will be sent to you at no further charge
Faulty or damaged goods
Period for claiming a fault: up to six years from delivery of the goods – within the first 30 days you can reject a faulty product and ask for a full refund, and for the first 12 months a fault is presumed to have been present on delivery
How: write to us at info@lunzo.ie and attach a photograph or a video of the goods – in most cases you do not have to send the goods back
Remedies: a replacement with a new item, a reasonable price reduction, or a refund of the full purchase price
You will find the details in Delivery and Payment, Returns and Exchanges, Faulty Goods.
Seller:
Urad Bianjiang Commerce Co., Ltd.
Address: Ximen Menkou, Baoyuan Area, Bayin Town, Urad Back Banner, Bayan Nur, Inner Mongolia, 015000, China
E-mail: ec-connection@web.de
Telephone: +86 135 6052 3271
Manufacturer:
Urad Bianjiang Commerce Co., Ltd.
Address: Ximen Menkou, Baoyuan Area, Bayin Town, Urad Back Banner, Bayan Nur, Inner Mongolia, 015000, China
E-mail: ec-connection@web.de
Telephone: +86 135 6052 3271
EU responsible person:
SELLERCROSS LTD
Address: 200 rue de la Croix Nivert, 75015 Paris, France
E-mail: info@sellercross.com
Telephone: +33 7 80 95 16 88