LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · support in English · Contact Us

Home page Home page PC & Laptop Accessories PC Components PC case accessories Graphics Card Holder 15.5 x 14 x 5.3 cm with Two Adjustable Arms and Locking Screws to Prevent GPU Sagging in the Case
Graphics Card Holder 15.5 x 14 x 5.3 cm with Two Adjustable Arms and Locking Screws to Prevent GPU Sagging in the Case

Graphics Card Holder 15.5 x 14 x 5.3 cm with Two Adjustable Arms and Locking Screws to Prevent GPU Sagging in the Case

Support against sagging of heavy graphics cards. Two sliding arms can be secured with screws at the required height to support the card from below and above. Full description
In stock
Delivery €1.59
30-day return policy
Colour:
€24.85
Safe shopping Safe shopping
Overview
Graphics Card Holder 15.5 x 14 x 5.3 cm with Two Adjustable Arms and Locking Screws to Prevent GPU Sagging in the Case

The graphics card holder serves as a support that prevents sagging of heavy graphics cards installed in the PCIe slot. Large cards with substantial coolers often droop on the side away from the back of the case due to their own weight, putting stress on the slot and the circuit board. The holder has a total height of 15.5 cm and a base length of 14 cm, from which a vertical rod extends. On the rod are two sliding arms with locking screws, between which the card is inserted and which can be fixed at the required height. The arms are 5.3 cm wide and have pads on the top side where the card rests.

  • Two adjustable arms – the lower arm supports the card from below, while the upper one holds it from above. Both can slide along the vertical rod and their position is secured with a hand-tightened screw with a knurled head, requiring no tools.
  • Dimensions – height 15.5 cm, base length 14 cm, and arm width 5.3 cm. The lower arm is positioned approximately 8 cm above the base according to the dimensions in the image, but the height of the arms can be adjusted according to the position of the card in a specific case. It is advisable to consider the dimensions, especially in cases with limited space beneath the card.
  • Flat base with holes – the elongated base stands under the card at the bottom of the case. It is equipped with a series of holes that, according to the images, allow it to be placed on the frame of a fan located on the bottom wall of the case.
  • Support without interfering with the card – the holder is not screwed to the card; the card simply rests between the arms. When replacing or removing the card, it is sufficient to loosen the screws and move the arms aside. The holder can also be easily moved to another card or to a different case.
  • Discreet design – the slim vertical rod and narrow arms take up minimal space in the case and do not obstruct airflow to the card's cooler or to the fans. When viewed through a transparent side panel, the holder is almost hidden beneath the card due to its slim construction.

Package contents:

  • 1x graphics card holder

The graphics card holder is suitable for gaming and work setups with long and heavy cards that show noticeable sagging downwards. Thanks to the adjustable height of the arms, it can be adapted to various cases and different positions of the slot on the motherboard. Installation involves placing the base under the card, sliding the arms to its edge, and tightening the screws. Before purchasing, it is advisable to measure the distance between the bottom edge of the card and the bottom of the case to ensure that the holder's height of 15.5 cm matches the given setup. The supported card then maintains a horizontal position and the PCIe slot is not permanently stressed by its weight.

Delivery and Returns
Price incl. VAT €24.85