LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · support in English · Contact Us

Home page Home page Hobbies & Garden Gardening Supplies Irrigation Garden Spray Nozzle with 1/2 Inch External Thread Black Plastic with a Range of 5-6 m for Watering Lawns and Gardens
Garden Spray Nozzle with 1/2 Inch External Thread Black Plastic with a Range of 5-6 m for Watering Lawns and Gardens

Garden Spray Nozzle with 1/2 Inch External Thread Black Plastic with a Range of 5-6 m for Watering Lawns and Gardens

Working pressure 1.5 to 3 bar, flow rate 160 to 520 l/h covers an area of over 100 m² around the installation site. Suitable for stands, spikes, and fixed systems. Full description
In stock
Delivery €1.59
30-day return policy
Colour:
€12.62
Safe shopping Safe shopping
Overview
Garden Spray Nozzle with 1/2 Inch External Thread Black Plastic with a Range of 5-6 m for Watering Lawns and Gardens

The plastic garden spray nozzle with a 1/2 inch external thread serves as the end piece of a water distribution system in gardens, lawns, or greenhouses. The black body of the nozzle features deflector blades at the top, which break the rising water stream into the surrounding area at full width, creating even coverage across the entire area. The working pressure ranges from 1.5 to 3 bar, with a flow rate of 160 to 520 litres per hour depending on the set water supply and current source. The spray radius of 5 to 6 metres allows coverage of an area of approximately 100 m² with a single nozzle without the need to move the equipment. The bottom part screws into standard garden distributions, stands, holders, or ground spikes with a 1/2 inch socket.

Main Features:

  • 1/2 Inch External Thread – compatible with standard garden distributions and stands
  • Spray Radius of 5 to 6 Metres – coverage of an area of approximately 100 m² with a single nozzle
  • Deflector Blades – break the water stream into a wide area
  • Plastic Construction – lightweight and resistant to common weather conditions
  • No Moving Metal Parts – no risk of corrosion or jamming
  • Working pressure of 1.5 to 3 bar for standard domestic, garden, and agricultural distributions
  • Flow rate of 160 to 520 l/h depending on the set pressure in the distribution
  • Black plastic body with a wide top deflector section
  • Suitable for watering lawns, flower beds, vegetable gardens, and smaller orchards
  • Can also be used for cooling air on hot days and refreshing outdoor areas
  • Can be mounted on a ground spike, stand, or directly into a water distribution with a 1/2 inch thread
  • Easy installation by screwing into the prepared threaded connection
  • Compact dimensions make installation easier even in restricted spaces around plants
  • Suitable as a spare part for existing irrigation systems, holders, stands, and spikes
  • Lightweight portable nozzle that can be quickly replaced with another size according to current needs

Package Contents: 1x spray nozzle

Screw the nozzle onto the water distribution with a 1/2 inch thread, onto a ground spike, onto a stand for above-ground installation, or onto the end of a PVC pipe as needed. Tighten the connection thoroughly to prevent water leakage at the thread contact during operation under normal pressures. Once the water is turned on, the water stream will reflect off the deflector blades and spray into the surrounding area at a wider angle all around. Maintain the working pressure between 1.5 to 3 bar for stable operation without drips and immediately after switching on the water supply. At the end of the season, disconnect the nozzle, rinse it with clean water, dry it, and store it in a dry place protected from frost to extend its lifespan and prevent limescale deposits.

Delivery and Returns
Price incl. VAT €12.62