LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · support in English · Contact Us

Home page Home page Hobbies & Garden Gardening Supplies Irrigation Garden Fog Generator with 10 Heads 350 W Stainless Steel and 5 m Cable Power Supply 220 V For Large Ponds Pools and Outdoor Installations
Garden Fog Generator with 10 Heads 350 W Stainless Steel and 5 m Cable Power Supply 220 V For Large Ponds Pools and Outdoor Installations

Garden Fog Generator with 10 Heads 350 W Stainless Steel and 5 m Cable Power Supply 220 V For Large Ponds Pools and Outdoor Installations

Ten membranes in two rows cover a long water surface with continuous mist. The source connects to a standard socket and the panel simply submerges in water. Full description
In stock
Delivery €1.59
30-day return policy
€287.29
Safe shopping Safe shopping
Overview
Garden Fog Generator with 10 Heads 350 W Stainless Steel and 5 m Cable Power Supply 220 V For Large Ponds Pools and Outdoor Installations

The ten-headed variant is aimed at larger water surfaces, where weaker setups cannot cover the entire length of the surface. The stainless steel panel carries ten ceramic membranes in two rows of five, which operate simultaneously to create a continuous band of mist. The assembly includes a power supply with a capacity of 350 W with a 5 m long input cable, allowing the electronics to be positioned sufficiently far from the water. The input voltage is 220 V, while the fogger operates at DC 48 V. The device is suitable for large garden ponds, pool and fountain features, as well as for commercial installations outdoors.

  • Ten spray heads — the range of membranes covers the entire length of the panel and creates mist even over wider surfaces.
  • Power of 350 W — the supplied source can power all membranes simultaneously even during prolonged continuous operation.
  • Stainless steel body — the stainless steel construction does not corrode and withstands year-round contact with water.
  • Five-metre cable — the length of the supply allows the source to be mounted on a wall, in a cabinet, or under a shelter out of reach of water.
  • Power supply 220 V — the source connects to a standard household socket and does not require any modifications to the electrical installation.
  • Cool mist — ultrasonic spraying does not heat the water, so the mist remains cool even after prolonged operation.
  • Set of 12 ceramic chips — replacement membranes are included and cover regular wear and tear.
  • Service key — you can replace individual chips with the included key without disassembling the entire panel.
  • Water quality — the water must not contain corrosive, oily, or alkaline substances and should be between 5 and 50 °C.
  • Wide application — the assembly is suitable for gardens, terraces, garages, supermarkets, hotels, and commercial exhibitions.

Contents of the package:

  • 1x ultrasonic fogger with 10 heads
  • 1x power supply
  • 12x ceramic chip
  • 1x key

The ten-headed model is designed for areas where the mist is intended to cover a really large space and act as a striking feature. Ten membranes on the stainless steel panel will distribute the mist evenly across the entire length and leave no empty spaces above the surface. Installation takes just a moment — the panel is placed in the water and the source is plugged into the socket. With the replacement set of 12 ceramic chips and the included key, maintenance is a matter of a few minutes. The device should not be left submerged permanently longer than necessary, and the level sensor should not be repaired independently.

Delivery and Returns
Price incl. VAT €287.29