LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Auto & Moto Car Spare Parts Fuel Hose AN10 1 m With Straight and 90° Angled Fittings Braided Black with Red Fittings Replacement Hose for Car Radiator
Fuel Hose AN10 1 m With Straight and 90° Angled Fittings Braided Black with Red Fittings Replacement Hose for Car Radiator

Fuel Hose AN10 1 m With Straight and 90° Angled Fittings Braided Black with Red Fittings Replacement Hose for Car Radiator

Braided fuel hose AN10, 1 m long for connecting the radiator. Straight and 90° angled fitting with a nut at the ends, black with red. Full description
In stock
€67.64
Safe shopping Safe shopping
Overview
Fuel Hose AN10 1 m With Straight and 90° Angled Fittings Braided Black with Red Fittings Replacement Hose for Car Radiator

The AN10 fuel hose is a replacement hose designed for connecting radiators with AN10 fittings. The hose is 1 m long and both ends come pre-fitted with connectors. One connector is straight and the other is angled at 90°, making it easier to route the hose in places where it needs to bend right at the fitting. The surface of the hose is made of black braid and the fittings are a combination of red and black. You can use this hose as a replacement for an old or damaged hose or for a new radiator installation.

  • Size AN10 — The hose and fittings are sized AN10, so you can connect them directly to AN10 fittings on the radiator or adapter. Please verify the size of the fittings on the other part you will be connecting the hose to before installation.
  • Length 1 m — The hose measures 1 m. Before purchasing, measure the distance between the fittings to ensure the hose length matches your setup. Allow for extra length for bends so that the hose is not taut after installation.
  • Straight Fitting — One end has a straight fitting with a nut that screws onto the AN10 fitting. This is suitable where the hose leads to the fitting in a straight direction and there is ample space around it.
  • 90° Angled Fitting — The other end features a 90° angled fitting with a nut. The hose thus exits the fitting to the side and does not need to be bent at a sharp angle.
  • Braided Surface — The hose has a black braid on the surface that covers the inner hose along its entire length from one fitting to the other. The braid is securely attached in the clamps of both fittings.
  • Installation — Place the nut of the fitting onto the AN10 fitting and tighten it with an appropriate wrench. Then connect the other end of the hose in the same manner. When routing the hose, ensure it is not kinked, taut, or in contact with sharp edges or hot parts of the engine.
  • Colour Scheme — The hose is black, the clamps of the fittings are red, and the nuts and angled part are black.
  • Usage — The hose is used to connect the radiator with AN10 fittings to other components, such as an adapter under the oil filter. You will find it useful for repairs, when replacing a worn hose, and for vehicle modifications.
  • Package Contents — 1x fuel hose AN10, 1 m long with straight and 90° angled fittings.

The 1 m long AN10 fuel hose is a replacement hose for connecting radiators with AN10 fittings. It has a straight and 90° angled fitting with nuts at the ends. The black braid covers the hose along its entire length, and the fittings are in a combination of red and black. The hose comes with the fittings already attached, so you can screw it directly onto the AN10 fittings after unpacking. Please measure the distance between the fittings and verify their size before ordering.

Price incl. VAT €67.64