Home page Home page Photo, Audio-Video & TV Microphones Microphone Accessories Microphone Windshields Foam Windshield for Microphone Length 159 mm Inner Diameter 25 mm Cylindrical Shape Made from Dense Sponge Foam Black For Handheld Microphones
Foam Windshield for Microphone Length 159 mm Inner Diameter 25 mm Cylindrical Shape Made from Dense Sponge Foam Black For Handheld Microphones

Foam Windshield for Microphone Length 159 mm Inner Diameter 25 mm Cylindrical Shape Made from Dense Sponge Foam Black For Handheld Microphones

Cylindrical foam cover with a larger inner opening for handheld and conference microphones. The dense black foam reduces wind and breath noise and protects the grille from saliva. Full description
In stock
€3.01
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Foam Windshield for Microphone Length 159 mm Inner Diameter 25 mm Cylindrical Shape Made from Dense Sponge Foam Black For Handheld Microphones

This foam windshield is designed for microphones with a long body, used for interviews, conferences, on stage or when filming outdoors. The cover is 159 mm long and has a straight cylindrical shape with the same thickness along its entire length. The opening, with an inner diameter of 25 mm, slides directly onto the microphone body, and the flexible foam fits snugly around it. The windshield helps reduce wind noise, breath blasts and harsh sibilants that would otherwise distort the recording. It also protects the microphone grille from saliva and dust.

The 25 mm inner diameter is the largest in the range, making this version suitable for microphones with a thicker end section that narrower covers cannot fit over. The cover is made from dense sponge foam, which is breathable and allows sound through without significantly muffling speech. The flexible material returns to its original shape after being compressed, so the cover can be fitted and removed repeatedly. The straight cylindrical shape, with an outer diameter of 41 mm, maintains an even wall thickness along its entire length, providing uniform protection around the grille. The cover's outer diameter is 41 mm.

  • Type – foam windshield for microphone
  • Length – 159 mm
  • Inner diameter – 25 mm
  • Outer diameter – 41 mm
  • Material – sponge foam
  • Colour – black
  • Function – reduces wind and breath noise and protects the grille from saliva
  • Use – reporter and handheld microphones for interviews and conferences, and stage microphones
  • Package contents – 1 foam microphone cover

Before fitting the cover, compare its dimensions with the diameter and length of your microphone. Slide the cover on carefully and slowly, using a twisting motion so that the foam stretches evenly and is not damaged. If it gets dirty, you can remove it and wash it gently in lukewarm water with a little mild detergent. After squeezing out the water, leave it to air dry and only put it back on the microphone once it is completely dry. Do not dry it in direct sunlight or near a heater, as this may cause the foam to lose its flexibility. The cover fits without tools and does not need any special fastening, as it stays in place on the microphone body thanks to its elasticity.

This foam windshield is a practical accessory for anyone recording speech outside the studio or speaking into a microphone at close range. At 15.9 cm long, the cover fits over the microphone head and helps produce a cleaner, clearer voice recording. It is suitable for reporters, presenters, speakers, and video and podcast creators. The black colour is unobtrusive on camera and matches most microphones. Thanks to the flexible and breathable foam, the cover lasts a long time and is easy to replace when the original has worn out. When choosing a cover, pay particular attention to the inner diameter, which should match the thickness of your microphone body.

Price incl. VAT €3.01