Home page Home page Hobbies & Garden Tools Grinders & Accessories Foam Sanding Disc 150 mm Grit 180 Coarser Hook and Loop Silicon Carbide For Wet and Dry Sanding of Wood Paint and Metal
Foam Sanding Disc 150 mm Grit 180 Coarser Hook and Loop Silicon Carbide For Wet and Dry Sanding of Wood Paint and Metal

Foam Sanding Disc 150 mm Grit 180 Coarser Hook and Loop Silicon Carbide For Wet and Dry Sanding of Wood Paint and Metal

Flexible 150 mm sanding disc with 180 grit for use with a random orbital sander or by hand. Suitable for coarser sanding of paint, filler, wood and metal. Full description
In stock
€15.24
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Foam Sanding Disc 150 mm Grit 180 Coarser Hook and Loop Silicon Carbide For Wet and Dry Sanding of Wood Paint and Metal

This foam sanding disc, with a diameter of 150 mm and a grit of 180, is a coarser abrasive for random orbital and orbital sanders as well as hand sanding. The abrasive layer is made of silicon carbide applied to flexible foam that follows the shape of the workpiece. The disc attaches using hook and loop, so it takes just a few seconds to replace. It is suitable for paint, wood, metal and gelcoat. The pack contains one disc without dust extraction holes.

Grit 180 is one of the coarser grades in the range and is suitable when you need to level a surface more quickly: sanding old paint, levelling filler or preparing wood before further sanding. The foam layer is flexible, allowing it to work well on flat surfaces, curved shapes, slopes and edges while reducing the risk of sanding hollows. The flexible fabric lets water and air pass through, so you can use the disc wet or dry, with a machine or by hand. The disc is designed for sanders with a 150 mm backing pad with a hook-and-loop surface, which it adheres to across its full area and stays firmly in place during use.

  • Type – foam sanding disc
  • Diameter – 150 mm
  • Grit – 180
  • Abrasive – silicon carbide
  • Attachment – hook and loop
  • Dust extraction holes – none
  • Sanding method – wet or dry
  • Use – random orbital or orbital sander with a 150 mm hook-and-loop backing pad, and hand sanding
  • Suitable surfaces – paint, wood, metal and gelcoat
  • Pack contents – 1 foam sanding disc, 150 mm, grit 180

When wet sanding, rinse the disc and workpiece with water regularly to prevent sanding dust from settling in the foam and to help the disc retain its cutting performance for longer. After use, rinse the disc, leave it to air dry and store it flat. For hand sanding, simply hold the disc with your palms or attach it to a hand sanding block with a hook-and-loop surface. Work without applying too much pressure and let the abrasive do the work for a more even result. Before moving to a finer grit, wipe the surface to remove any coarser grains or sanding dust from the previous step.

The 150 mm sanding disc with grit 180 is a practical addition to any workshop, garage or home DIY kit. The flexible foam adapts to the shape of the workpiece and helps achieve an even sanded finish without sharp transitions. Grit 180 is usually followed by finer grades that prepare the surface for painting or polishing. The hook-and-loop attachment lets you quickly replace the disc with another grit to suit the current stage of your work. Use the disc to renovate car paintwork, restore furniture, sand metal parts and maintain boats with gelcoat. Its larger diameter covers a wider area with each stroke, speeding up work on bonnets, doors, furniture panels and boat hulls while keeping the finish even.

Price incl. VAT €15.24