Home page Home page Hobbies & Garden Tools Grinders & Accessories Foam Sanding Disc 125 mm Grit 360 Medium Coarse Hook and Loop No Holes Silicon Carbide For Wet and Dry Sanding of Filler and Paint
Foam Sanding Disc 125 mm Grit 360 Medium Coarse Hook and Loop No Holes Silicon Carbide For Wet and Dry Sanding of Filler and Paint

Foam Sanding Disc 125 mm Grit 360 Medium Coarse Hook and Loop No Holes Silicon Carbide For Wet and Dry Sanding of Filler and Paint

125 mm foam disc with 360 grit and hook-and-loop backing for smoothing filler and sanding old paint. Suitable for machine and hand sanding, both dry and wet. Full description
In stock
€15.24
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Foam Sanding Disc 125 mm Grit 360 Medium Coarse Hook and Loop No Holes Silicon Carbide For Wet and Dry Sanding of Filler and Paint

This foam sanding disc with a diameter of 125 mm and a grit of 360 is a medium-coarse abrasive material for random orbital and orbital sanders, as well as hand sanding. The abrasive layer is made of silicon carbide applied to flexible foam, which follows the shape of the workpiece. The disc attaches with hook-and-loop backing, so it takes just a few seconds to replace. It is suitable for paint, wood, metal and gelcoat. The pack contains one disc with no dust extraction holes.

Grit 360 follows coarser grades and is particularly suitable for smoothing filler, removing scratches left by coarser sanding and sanding old paint before applying primer surfacer. The foam layer is flexible, allowing it to work well on flat surfaces, curved shapes, slopes and edges, while reducing the risk of sanding hollows. The flexible backing allows water and air to pass through, so you can use the disc for both dry and wet sanding, by machine or by hand. The disc is designed for sanders with a 125 mm backing pad with hook-and-loop backing; it adheres across the entire surface and stays firmly in place during use.

  • Type – foam sanding disc
  • Diameter – 125 mm
  • Grit – 360
  • Abrasive – silicon carbide
  • Attachment – hook and loop
  • Dust extraction holes – none
  • Sanding method – dry and wet
  • Use – random orbital or orbital sander with a 125 mm hook-and-loop backing pad and hand sanding
  • Suitable surfaces – paint, wood, metal and gelcoat
  • Pack contents – 1 foam sanding disc, 125 mm, 360 grit

When wet sanding, rinse the disc and workpiece regularly with water to prevent sanding dust from settling in the foam and to help the disc retain its cutting performance for longer. After use, rinse the disc, leave it to air-dry and store it flat. For hand sanding, simply hold the disc in your palms or attach it to a hook-and-loop hand sanding block. Work without applying too much pressure and let the abrasive do the work for a more even result. Before moving to a finer grit, wipe the surface to remove any coarser particles or sanding dust left from the previous step.

The 125 mm sanding disc with 360 grit is a practical addition to any workshop, garage or home DIY kit. The flexible foam adapts to the shape of the workpiece and helps achieve an even finish without sharp transitions. Grit 360 is usually followed by intermediate sanding with finer grades, which prepare the surface for the next coat of paint. The hook-and-loop attachment allows you to quickly replace the disc with a different grit to suit the current stage of work. Use the disc when restoring car paintwork, refinishing furniture, sanding metal components and maintaining boats with gelcoat. Its compact diameter makes it suitable for smaller areas and easy to use even in places where a larger disc cannot reach.

Price incl. VAT €15.24