Home page Home page Hobbies & Garden Tools Grinders & Accessories Foam sanding disc 125 mm 180 grit Coarser Hook and loop No holes Silicon carbide For wet and dry sanding of wood paint and metal
Foam sanding disc 125 mm 180 grit Coarser Hook and loop No holes Silicon carbide For wet and dry sanding of wood paint and metal

Foam sanding disc 125 mm 180 grit Coarser Hook and loop No holes Silicon carbide For wet and dry sanding of wood paint and metal

Flexible 125 mm sanding disc with 180 grit for random orbital sanders and hand sanding. Suitable for coarser sanding of paint, filler, wood and metal. Full description
In stock
€14.80
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Foam sanding disc 125 mm 180 grit Coarser Hook and loop No holes Silicon carbide For wet and dry sanding of wood paint and metal

This foam sanding disc, with a diameter of 125 mm and 180 grit, is a coarser abrasive for random orbital and orbital sanders, as well as for hand sanding. The abrasive layer is made of silicon carbide applied to flexible foam that follows the shape of the workpiece. The disc attaches with hook-and-loop fastening, so it takes just a few seconds to change. It is suitable for paint, wood, metal and gelcoat. The pack contains one disc without dust-extraction holes.

180 grit is among the coarser grades in the range and is suitable when a surface needs levelling more quickly: sanding old paint, levelling filler or preparing wood before further sanding. The foam layer is flexible, so it works well on flat surfaces, curved shapes, slopes and edges, while reducing the risk of sanding hollows. The flexible fabric lets water and air pass through, so you can use the disc for wet or dry sanding, with a machine or by hand. The disc is designed for sanders with a 125 mm backing pad with hook-and-loop fastening; it adheres across the entire surface and stays firmly in place during use.

  • Type – foam sanding disc
  • Diameter – 125 mm
  • Grit – 180
  • Abrasive – silicon carbide
  • Fastening – hook and loop
  • Dust-extraction holes – none
  • Sanding method – wet or dry
  • Use – random orbital or orbital sander with a 125 mm hook-and-loop backing pad, and hand sanding
  • Suitable surfaces – paint, wood, metal and gelcoat
  • Pack contents – 1 foam sanding disc, 125 mm, 180 grit

When wet sanding, rinse the disc and workpiece regularly with water to prevent sanding dust from settling in the foam and to help the disc retain its cutting performance for longer. After use, rinse the disc, leave it to air-dry and store it flat. For hand sanding, simply hold the disc in your hands or attach it to a hand sanding block with hook-and-loop fastening. Work without applying too much pressure and let the abrasive do the work; this will give a more even result. Before moving to a finer grit, wipe the surface to remove any coarser particles or sanding dust from the previous step.

The 125 mm sanding disc with 180 grit is a practical addition to any workshop, garage or home toolkit. The flexible foam adapts to the shape of the workpiece and helps achieve an even finish without sharp transitions. After sanding with 180 grit, finer grades are usually used to prepare the surface for painting or polishing. Hook-and-loop fastening lets you quickly change the disc for a different grit as the work progresses. Use the disc when restoring car paintwork, finishing furniture, sanding metal parts or maintaining boats with gelcoat. Its compact diameter makes it suitable for smaller areas, and it is easy to use even in places that a larger disc cannot reach.

Price incl. VAT €14.80