Home page Home page Sports & Outdoor Fishing Fly Tying Kit with 360° Rotary Vice and 5 Tools Hardened Jaws C-Clamp up to 39.5 mm Bobbin Holder Threader Scissors Whip Finisher and Needle
Fly Tying Kit with 360° Rotary Vice and 5 Tools Hardened Jaws C-Clamp up to 39.5 mm Bobbin Holder Threader Scissors Whip Finisher and Needle

Fly Tying Kit with 360° Rotary Vice and 5 Tools Hardened Jaws C-Clamp up to 39.5 mm Bobbin Holder Threader Scissors Whip Finisher and Needle

Rotary vice with replacement jaws and five essential tools in one pack. Everything you need for fly tying and assist hooks at your workbench. Full description
In stock
€68.95
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Fly Tying Kit with 360° Rotary Vice and 5 Tools Hardened Jaws C-Clamp up to 39.5 mm Bobbin Holder Threader Scissors Whip Finisher and Needle

This fly tying kit combines a rotary vice with five essential tools, so you can start tying as soon as you unpack it. The vice has hardened steel jaws that open up to 2 mm, securely holding hooks from size #26 up to hooks with wire measuring 2 mm in diameter. The head rotates 360° and is secured to the tabletop with a C-clamp. The vice comes with a bobbin holder, threader, scissors, whip finisher and a 16.8 cm bodkin needle. The kit is suitable for tying flies and assist hooks.

The vice stands 17.5 cm tall, and its C-clamp fits a tabletop up to 39.5 mm thick. Secure the hook using the locking lever on the vice head, then rotate the head to position the fly as needed. The vice is made from a combination of steel, iron, brass and aluminium, and the pack also includes replacement jaws. The tools are sized for work at the table: the bobbin holder measures 10.5 cm, the threader 10.5 cm, the scissors 11 cm and the whip finisher 12 cm.

  • Type – fly tying kit with rotary vice and tools
  • Vice – 17.5 cm tall, 360° rotating head, hook secured with a locking lever
  • Jaws – hardened steel, maximum opening 2 mm, for hooks from size #26
  • Mounting – C-clamp for a tabletop up to 39.5 mm thick
  • Bodkin needle – 16.8 cm long, metal tip with handle
  • Threader – 10.5 cm long, wire loop
  • Scissors – 11 cm long, for cutting thread and materials
  • Bobbin holder – 10.5 cm long, flexible arms with brass tips
  • Whip finisher – 12 cm long, rotating, with a brass handle
  • Pack contents – rotary vice with C-clamp, replacement jaws, bodkin needle, threader, scissors, bobbin holder and whip finisher

First, secure the vice to the edge of the table and tighten the clamp's adjustment screw. Place the hook in the jaws and secure it with the lever. Fit the bobbin of thread into the holder and use the threader to pass the thread through the tube. Use the bodkin needle to spread varnish or free any trapped fibres, trim excess thread and material with the scissors, and finish the fly head with the whip finisher. After use, wipe the tools dry and store them with the vice in a dry place.

This kit provides a complete set of fly tying equipment in one pack, so there is no need to buy the tools separately. It is suitable for beginner fly tyers as well as experienced anglers who want a second kit, for example at their holiday cottage. The 360° rotary vice makes it easier to work on every side of the fly, while the 12 cm whip finisher and bobbin holder speed up winding and finishing. The tools take up little space and can easily be stored in your fly tying materials box.

Price incl. VAT €68.95