Home page Home page Hobbies & Garden Tools Soldering Irons & Accessories Flashing Light Kit with Two LEDs for Soldering Astable Multivibrator with 9014 Transistors Power Supply 3 to 12 V Soldering Kit
Flashing Light Kit with Two LEDs for Soldering Astable Multivibrator with 9014 Transistors Power Supply 3 to 12 V Soldering Kit

Flashing Light Kit with Two LEDs for Soldering Astable Multivibrator with 9014 Transistors Power Supply 3 to 12 V Soldering Kit

Simple soldering kit for a flashing light, where two LEDs alternate in lighting up. The small number of components is ideal for initial attempts with soldering and electronics. Full description
In stock
€4.32
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Flashing Light Kit with Two LEDs for Soldering Astable Multivibrator with 9014 Transistors Power Supply 3 to 12 V Soldering Kit

The simple flashing light kit is a small soldering kit that allows you to assemble a circuit with two LEDs that flash alternately. The circuit is a classic astable multivibrator, in which two transistors switch each other and the capacitors determine the flashing speed. The circuit contains only a few components, making it ideal as a very first project for anyone learning to solder. It is powered by a direct voltage of 3 to 12 V, so a battery or a standard adapter will suffice. The kit is supplied as loose components that you will solder onto the board yourself.

On the square printed circuit board, there are two LEDs in clear housings at the top and a pair of resistors between them. In the centre, there are two electrolytic capacitors 22 µF and on the sides, two 9014 transistors. At the bottom of the board, there are soldering points for VCC and GND to connect the power supply, and mounting holes in the corners. The resistor values according to the schematic are 510 Ω and 33 kΩ, so you will understand the entire circuit in no time and easily verify how the individual components work together. When observing the flashing LEDs, it is clear to see how the two transistors regularly alternate in conducting current.

  • Type – flashing light kit with two LEDs for soldering
  • Circuit – astable multivibrator
  • Transistors – 2 x 9014
  • Capacitors – 2 x electrolytic 22 µF
  • Resistors – 510 Ω and 33 kΩ
  • Power Supply – 3 to 12 V DC according to the schematic
  • Execution – loose components for soldering and assembly
  • Contents of the Package – printed circuit board and component set (2 LEDs, 2 transistors 9014, 2 electrolytic capacitors 22 µF, 4 resistors)

When assembling, start with the resistors, then solder in the transistors, capacitors, and finally the LEDs. Insert the transistors according to the outline on the board, ensure the polarity for the electrolytic capacitors, and for the LEDs, the longer lead is positive. After soldering, check the joints, remove excess leads and flux residues, and only then connect the power supply with the correct polarity to the VCC and GND points.

The flashing light with two LEDs is one of the most popular first kits because it is quickly completed and the result is immediately visible. With this simple circuit, you will acquire basic soldering skills and simultaneously understand how a transistor works as a switch. The kit is suitable for beginners, children under adult supervision, students, and electronics clubs. The finished flashing light serves as a small decoration or as a basis for further experiments, for example, with different capacitor values that will change the flashing speed. Thanks to the small number of components, assembly can be completed in a short time and it also makes a cheap gift for budding DIY enthusiasts.

Price incl. VAT €4.32