Home page Home page Home & Household Supplies Kitchen Cooking Kitchen Knives & Scissors Knife Sharpeners & Steels Fixed Angle Knife Sharpener S06 Set of 4 Water Stones 120 to 1500 Grit Leather Strop and Paste Stand with Clamp
Fixed Angle Knife Sharpener S06 Set of 4 Water Stones 120 to 1500 Grit Leather Strop and Paste Stand with Clamp

Fixed Angle Knife Sharpener S06 Set of 4 Water Stones 120 to 1500 Grit Leather Strop and Paste Stand with Clamp

The S06 stand-mounted sharpener comes with four water stones from 120 to 1500 grit and a leather strop with polishing paste for sharpening and fine honing knife edges. Full description
In stock
€97.77
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Fixed Angle Knife Sharpener S06 Set of 4 Water Stones 120 to 1500 Grit Leather Strop and Paste Stand with Clamp

The S06 fixed-angle knife sharpener helps create a consistent edge without having to estimate the angle of the stone. The stand is made from aluminium alloy and is firmly attached to the table with a screw clamp. The stone is secured to a guide rod with a spring and handle, and moves along the blade at a constant angle. This set includes 4 water sharpening stones in 120, 320, 600 and 1500 grit for progressing from coarse sharpening to fine finishing. The set also includes a leather strop and 15 g of polishing paste.

The S06 stand consists of an aluminium base with a screw clamp for attaching it to the table, on which a knife holder with two metal jaws is mounted. A vertical post extends from the base, with a sliding jointed guide-rod holder secured by a wing nut. The sharpening angle is adjusted by moving the jointed holder along the post. The setting then remains the same for both sides of the blade, creating a symmetrical edge. Clamp the knife in the jaws so that the blade does not move during sharpening strokes. To change the stone, simply release the holder on the guide rod and insert a different grit.

  • Model – S06
  • Type – stand-mounted fixed-angle knife sharpener
  • Stand material – aluminium alloy
  • Angle adjustment – jointed holder slides along the vertical post and is secured with a wing nut
  • Attachment – screw clamp for attaching to a table
  • Knife spine thickness – up to 7 mm
  • Sharpening stones – water stones in 120, 320, 600 and 1500 grit
  • Accessories – leather strop and 15 g of polishing paste
  • Package contents – base with screw clamp for attaching to a table and knife holder with two jaws, vertical post with jointed holder and wing nut, guide rod with stone holder, spring and handle, 4 water sharpening stones in 120, 320, 600 and 1500 grit, leather strop and 15 g of polishing paste

Soak the water stones before sharpening and keep them damp while working. Start with the 120-grit stone to restore a blunt edge, then continue with the 320- and 600-grit stones and finish the edge with the fine 1500-grit stone. Finally, apply a little polishing paste to the leather strop and hone the edge with a few strokes. Rinse the stones after use and leave them to air-dry.

The S06 set with water stones is a practical choice for the home kitchen or workshop, where you want to keep your knives sharp yourself. The fixed sharpening angle makes it easy for beginners to use, and the results are repeatable. The combination of stones from coarse to fine grit and a leather strop with paste covers both sharpening and final polishing. The stand with its screw clamp for attaching to a table stays firmly in place during use. After use, the set is easy to dismantle and store.

Price incl. VAT €97.77