LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · support in English · Contact Us

Home page Home page PC & Laptop Accessories Printers and 3D printing 3D printing accessories Filament storage and drying Filament Dryer with Adjustable Temperature 45–70 °C and Timer up to 48 h for 1.75 and 2.85 mm Filaments Hot Air Heating 360° Grey for 3D Printing
Filament Dryer with Adjustable Temperature 45–70 °C and Timer up to 48 h for 1.75 and 2.85 mm Filaments Hot Air Heating 360° Grey for 3D Printing

Filament Dryer with Adjustable Temperature 45–70 °C and Timer up to 48 h for 1.75 and 2.85 mm Filaments Hot Air Heating 360° Grey for 3D Printing

Moist filament is dried before printing with hot air from all sides. Both the temperature and drying time can be adjusted, and the display continuously shows the humidity. Full description
In stock
Delivery €1.59
30-day return policy
€145.81
Safe shopping Safe shopping
Overview
Filament Dryer with Adjustable Temperature 45–70 °C and Timer up to 48 h for 1.75 and 2.85 mm Filaments Hot Air Heating 360° Grey for 3D Printing

The filament dryer is used to remove moisture from printing filaments, which have gradually absorbed it from the surrounding air during storage. The drying temperature is adjustable in the range of 45–70 °C and can be tailored to the specific type of material being used on the 3D printer. Hot air circulates around the spool from all sides, with the drying time selectable from 0 to 48 h, and the digital display continuously shows the remaining time, temperature, and humidity. The device is designed for filaments with a diameter of 1.75 mm and 2.85 mm, accommodating both commonly used sizes of printing filaments. Inside, there is space for one spool, which remains visible throughout the drying process thanks to the dark transparent cover.

  • Temperature Range – the adjustable temperature from 45 to 70 °C covers lower values for heat-sensitive filaments as well as higher temperatures for materials that require more thorough drying. The set value is displayed directly on the screen.
  • Effective Drying – thanks to the 360° hot air heating, warm air flows around the entire spool, ensuring that heat affects the wound filament all around, rather than just from one side.
  • Drying Time – the timer is adjustable from 0–48 h depending on the condition of the filament, and the remaining time is continuously counted down on the display. It is always clear when the drying will be finished.
  • Digital Display – shows the countdown of time, drying temperature, and humidity, allowing the drying process to be constantly monitored. Below the display are buttons for settings, up and down arrows for changing values, and a button for turning the device on and off.
  • Compatibility – the dryer is suitable for filaments with a diameter of 1.75 mm and 2.85 mm and can be used with 3D printers that operate with either of these two diameters.
  • Design – the grey body is complemented by a black control panel and a dark transparent cover. The inserted spool is easily visible through it even during drying, making it simple to check how much filament remains on it.

Contents of the Package:

  • 1x filament dryer

The dryer is useful wherever printing is done with moisture-sensitive materials and where filaments need to be well dried before printing. The adjustable drying time of up to 48 h allows for the selection of the cycle length according to the condition of the specific spool, from short drying to longer drying of heavily damp filaments. The display showing humidity, temperature, and remaining time provides visibility of the drying process throughout, eliminating the need to estimate how much longer it will take. The combination of adjustable temperature and 360° hot air heating ensures effective drying that can be adapted to various types of printing filaments. The dryer is supplied without filament; the spool in the image is for illustrative purposes only.

Delivery and Returns
Price incl. VAT €145.81