Home page Home page PC & Laptop Accessories PC Components CPU coolers and fans Fan 50 x 50 x 10 mm 5 V 2-pin Quiet 20 dBA 5000 rpm Oil Bearing Black For Cooling Processors 3D Printers and Electronics
Fan 50 x 50 x 10 mm 5 V 2-pin Quiet 20 dBA 5000 rpm Oil Bearing Black For Cooling Processors 3D Printers and Electronics

Fan 50 x 50 x 10 mm 5 V 2-pin Quiet 20 dBA 5000 rpm Oil Bearing Black For Cooling Processors 3D Printers and Electronics

Slim 50 mm cooling fan with a 5 V power supply and a 2-pin connector for cooling chips, 3D printers, electronics enclosures and PC cases. Full description
In stock
€8.25
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Fan 50 x 50 x 10 mm 5 V 2-pin Quiet 20 dBA 5000 rpm Oil Bearing Black For Cooling Processors 3D Printers and Electronics

The slim 50 x 50 x 10 mm fan offers a slightly larger blade area than the smallest models, while still fitting into tight spaces. It is designed for a 5 V power supply and connects via two wires with a small 2-pin connector. Use it in a computer case, on a processor heatsink, in an electronics enclosure or by the print head of a 3D printer. The black plastic frame has four screw holes in the corners, making it easy to attach to a grille, panel or heatsink. Its low profile is ideal wherever every millimetre counts.

The rotor spins at 5000 rpm with a tolerance of 10%, and the fan delivers an airflow of 6 CFM. This is enough to cool power components, voltage regulators, chips and smaller heatsinks. The noise level is rated at 20 dBA, so the fan is not too disruptive while operating. The current draw is 0.18 A, so it can be powered easily from a standard 5-volt output. The oil bearing ensures smooth operation, and the manufacturer specifies a service life of 20,000 hours.

  • Dimensions – 50 x 50 x 10 mm
  • Power supply – 5 V
  • Current – 0.18 A
  • Speed – 5000 rpm ± 10%
  • Airflow – 6 CFM
  • Noise level – 20 dBA
  • Bearing – oil
  • Service life – 20,000 h
  • Connection – 2 wires and a 2-pin connector with a 2.5 mm pitch
  • Mounting – 4 holes in the corners of the frame
  • Colour – black
  • Package contents – 1 fan 50 x 50 x 10 mm with attached cable and connector

Before installation, check which direction the air needs to flow, then orient the fan with the intake or exhaust side facing the right way. Connect it to a 5 V power supply and secure the cable so it cannot interfere with the blades. Regularly removing dust with a soft brush or compressed air helps maintain quiet operation and good cooling performance over the long term. The fan can be installed horizontally or vertically and, if needed, several can be used side by side, for example above a board with several heat-generating components. The 50 mm size is popular for 3D printer boards and smaller power supplies, where it offers a sensible compromise between performance and installation size. When replacing an old part, simply check the frame dimensions and connector type.

The 50 mm fan is a suitable choice as a replacement for a worn part or as an addition to your own projects where cool air needs to be supplied. It can be used in a computer, by a 3D printer, in a router or in other electronics that heat up during operation. It combines quiet operation, a low supply voltage and a simple connection. Its thickness of just 10 mm allows it to be installed in narrow enclosures and behind panels.

Price incl. VAT €8.25