Home page Home page Hobbies & Garden Development boards ESP32-S3 Development Board with 4" Touchscreen 480 x 480 RS485 and SHT20 Sensor 86 mm Wall Panel For Arduino LVGL and Thermostat
ESP32-S3 Development Board with 4" Touchscreen 480 x 480 RS485 and SHT20 Sensor 86 mm Wall Panel For Arduino LVGL and Thermostat

ESP32-S3 Development Board with 4" Touchscreen 480 x 480 RS485 and SHT20 Sensor 86 mm Wall Panel For Arduino LVGL and Thermostat

ESP32-S3 wall panel with touchscreen, RS485 interface and SHT20 sensor for measuring temperature and humidity. For your own thermostat and IoT projects. Full description
In stock
€135.33
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
ESP32-S3 Development Board with 4" Touchscreen 480 x 480 RS485 and SHT20 Sensor 86 mm Wall Panel For Arduino LVGL and Thermostat

This version of the SpotPear wall-mounted development board combines an ESP32-S3 chip and a 4" touchscreen with a resolution of 480 x 480 px, an RS485 interface and an SHT20 temperature and humidity sensor. Thanks to the built-in sensor, the panel can measure the room climate directly and display it on screen. The ESP32-S3 chip offers Wi-Fi and Bluetooth, so you can send measured values to a network or smart home system. You can write your own application in the Arduino environment and design the graphical interface using the LVGL library. This version does not include a relay.

The RS485 bus enables communication with other devices over longer distances, for example with a heating control unit or meters. The display uses a GC9503 controller and the touchscreen uses an FT6336 controller. The front panel measures 86.5 x 86.5 mm and matches the 86-type wall switch format; the white rear enclosure measures 86 x 86 mm and has screw terminals. A separate programmer, which is not included, is required to upload your own programme.

  • Chip – ESP32-S3 with Wi-Fi and Bluetooth
  • Display – 4" touchscreen LCD, 480 x 480 px resolution
  • Display controller – GC9503
  • Touch controller – FT6336
  • Sensor – SHT20 for measuring temperature and humidity
  • Communication – RS485 interface
  • Relay – not included in this version
  • Programme upload – requires a separate programmer, which is not included
  • Front panel dimensions – 86.5 x 86.5 x 13.6 mm
  • Format – 86-type wall panel
  • Programming – Arduino, LVGL graphics library
  • Brand – SpotPear
  • Package contents – 1x ESP32-S3 development board with 4" touchscreen, RS485 interface and SHT20 sensor in a wall-mounted design

The panel is a suitable basis for your own thermostat, an indoor weather station or a controller that uses measured temperature and humidity to control other devices via the RS485 bus. You can display current readings, graphs and setting buttons on the screen. You can send sensor data via Wi-Fi to your phone, home server or smart home system, and track temperature and humidity over time. The panel can also control a boiler, ventilation system or humidifier via the RS485 bus. Have the wall installation and wiring carried out by a suitably qualified person, and always disconnect the power supply before starting work.

The ESP32-S3 development board with a 4" display, RS485 interface and SHT20 sensor is the best-equipped version for measuring and controlling the climate. It offers a 480 x 480 px touchscreen, Wi-Fi, Bluetooth and an 86-format enclosure for wall mounting. Support for the Arduino environment and the LVGL library makes it easy to create your own interface. Make sure you have a separate programmer ready to upload your programme. It is a practical choice for anyone who wants to build their own smart thermostat or wall-mounted weather station.

Price incl. VAT €135.33