Home page Home page Hobbies & Garden Development boards ESP32-S3 Development Board with 4" Touchscreen 480 x 480 and 3 Relays Wall Panel 86 mm TF Slot For Arduino LVGL and Control of 3 Circuits
ESP32-S3 Development Board with 4" Touchscreen 480 x 480 and 3 Relays Wall Panel 86 mm TF Slot For Arduino LVGL and Control of 3 Circuits

ESP32-S3 Development Board with 4" Touchscreen 480 x 480 and 3 Relays Wall Panel 86 mm TF Slot For Arduino LVGL and Control of 3 Circuits

ESP32-S3 wall-mounted touchscreen panel with three relays for independently switching three circuits. Upload your programme via USB and create the interface in Arduino and LVGL. Full description
In stock
€120.48
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
ESP32-S3 Development Board with 4" Touchscreen 480 x 480 and 3 Relays Wall Panel 86 mm TF Slot For Arduino LVGL and Control of 3 Circuits

The programmable SpotPear wall panel combines an ESP32-S3 chip with a 4" touchscreen with a resolution of 480 x 480 px and three relays on the rear. This allows you to switch up to three circuits independently using a single panel, for example lights in different parts of a room. The ESP32-S3 chip offers Wi-Fi and Bluetooth, so you can connect the panel to your home network and control it remotely too. Write your own application in the Arduino environment and design the display graphics using the LVGL library. It is a handy starting point for building your own smart home controller.

The display with an ST7701 controller is complemented by a touch layer with a GT911 controller for convenient fingertip operation. The programme is uploaded directly via the USB port, so no separate programmer is needed. The board also has a TF memory card slot for storing images, icons or measured data, as well as an interface for connecting a battery. The front panel measures 86.5 x 86.5 mm, conforms to the 86-type wall switch format and looks like a modern touchscreen switch on the wall.

  • Chip – ESP32-S3 with Wi-Fi and Bluetooth
  • Display – 4" LCD touchscreen, resolution 480 x 480 px
  • Display controller – ST7701
  • Touch controller – GT911
  • Relays – 3 relays for three separate circuits
  • Interfaces – TF card slot, battery interface
  • Programme upload – via USB port, with no additional programmer
  • RS485 – not included in this version
  • Temperature and humidity sensor – not included in this version
  • Front panel dimensions – 86.5 x 86.5 x 13.6 mm
  • Format – 86-type wall panel
  • Programming – Arduino, LVGL graphics library
  • Brand – SpotPear
  • Package contents – 1x ESP32-S3 development board with 4" touchscreen and 3 relays in a wall-mounted design

Three relays offer more options than the single-circuit version. You can create buttons on a single display for the main light, a lamp and a fan, or programme scenes and timed switching. Each relay can be controlled independently from the display, according to a schedule or via a command from your phone over Wi-Fi or Bluetooth. You can also display the time, weather or the status of each circuit on screen, so the panel replaces several conventional switches at once. The relays should be connected to the electrical installation by a suitably qualified person, and the power supply must be disconnected before every installation.

The ESP32-S3 development board with a 4" display and three relays is ideal for anyone who wants to build their own wall controller for multiple appliances. It combines a 480 x 480 px touchscreen, Wi-Fi and Bluetooth in a single 86-format housing. Upload the programme easily via USB and store data on a TF card. Support for the Arduino environment and the LVGL library makes it easier to create your own graphical interface. The result is a control panel tailored to your needs.

Price incl. VAT €120.48