Home page Home page Home & Household Supplies Home electrical supplies Back boxes and blanking plates Double Lever Wire Connectors 30 pcs Feed-through Quick Connector 2 x 1 to 1 for 0.08 to 2.5 mm² Cables 32 A 250 V Copper Contacts For Home
Double Lever Wire Connectors 30 pcs Feed-through Quick Connector 2 x 1 to 1 for 0.08 to 2.5 mm² Cables 32 A 250 V Copper Contacts For Home

Double Lever Wire Connectors 30 pcs Feed-through Quick Connector 2 x 1 to 1 for 0.08 to 2.5 mm² Cables 32 A 250 V Copper Contacts For Home

Thirty double feed-through connectors for connecting two pairs of wires at the same time without tools. Each wire is secured by its own lever and the connection can be disconnected again. Full description
In stock
€22.23
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Double Lever Wire Connectors 30 pcs Feed-through Quick Connector 2 x 1 to 1 for 0.08 to 2.5 mm² Cables 32 A 250 V Copper Contacts For Home

A value pack of thirty double feed-through quick connectors, designed for quickly connecting two parallel wires at once. Each connector has two separate channels in a single housing; two wires are inserted from opposite sides into each channel, and each is secured by a separate lever. The connectors are rated for a current of 32 A and a voltage of 250 V, making them suitable for standard domestic lighting and socket circuits. Work without soldering, screws or insulating tape.

The contact section is made of red copper, providing good conductivity and resistance to corrosion. A flexible stainless steel spring clamp holds the wire securely and retains its elasticity even after being opened many times. The housing is made from heat-resistant, flame-retardant plastic. The connector accepts wires with a cross-section of 0.08 to 2.5 mm², from fine-stranded wires to standard installation wires.

The double design is useful when you need to extend or repair a two-core supply cable and do not want to use two separate connectors. Typical applications include repairing a cable cut while drilling, extending a light fitting cable or connecting power to an LED strip. The two channels have orange and blue levers, making it easy to see at a glance which pair of wires belongs together. Once the lever is lowered, the wire remains firmly clamped, and the connection can later be taken apart again without damaging the wire.

  • Design – double feed-through connector, 2 x 1 to 1, with four levers
  • Rated current – 32 A
  • Rated voltage – 250 V
  • Suitable wires – cross-section 0.08 to 2.5 mm²
  • Connector dimensions – 31.5 x 13 x 13.5 mm
  • Contact material – red copper
  • Clamping spring – stainless steel
  • Housing – flame-retardant plastic
  • Pack contents – 30 double feed-through lever connectors

Wiring is simple. Strip the insulation from the end of the wire, lift the lever, insert the wire into the opening as far as it will go, then lower the lever. Repeat with the opposite wire on the other side of the same channel, then with the second pair of wires. To change the wiring, simply lift the lever again and pull out the wire. Always switch off the circuit breaker for the relevant circuit before starting work, and check that the entire stripped end of the wire is inside the connector.

The pack of thirty is ideal for electricians, maintenance workers and DIY enthusiasts who frequently connect two-core supply cables and want to keep a supply close at hand. The compact body, measuring 31.5 x 13 x 13.5 mm, fits into a standard installation box or beneath a light fitting cover. One connector replaces two single connectors and saves space. Lever operation saves time and keeps the connection neat and easy to inspect. A practical consumable for the workshop, home or any service tool case.

Price incl. VAT €22.23