Home page Home page Home & Household Supplies Home electrical supplies Back boxes and blanking plates Double Lever Quick Connectors 50 pcs Through Connector 2 x 1 to 1 for 0.08 to 2.5 mm² Cross-Section 32 A 250 V Copper Contacts For Electricians
Double Lever Quick Connectors 50 pcs Through Connector 2 x 1 to 1 for 0.08 to 2.5 mm² Cross-Section 32 A 250 V Copper Contacts For Electricians

Double Lever Quick Connectors 50 pcs Through Connector 2 x 1 to 1 for 0.08 to 2.5 mm² Cross-Section 32 A 250 V Copper Contacts For Electricians

Large pack of fifty double through connectors for connecting two pairs of wires at the same time. The levers hold each wire separately and the connection can be disconnected again. Full description
In stock
€35.76
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Double Lever Quick Connectors 50 pcs Through Connector 2 x 1 to 1 for 0.08 to 2.5 mm² Cross-Section 32 A 250 V Copper Contacts For Electricians

The pack contains fifty double through lever quick connectors, which connect two pairs of wires in one housing at the same time. Each connector has two separate channels, and two wires are inserted opposite one another in each channel. Each wire is secured by its own lever, so each connector has four levers in total. The connectors are rated for a nominal current of 32 A and a nominal voltage of 250 V. They can be connected without soldering, screwing or insulating tape.

The conductive part of each connector consists of red copper contacts, which conduct electricity well and resist corrosion. The wire is pressed by a spring clip made of stainless steel, which retains its flexibility even after the lever has been opened repeatedly. The housing is made of flame-retardant plastic with increased heat resistance. The connector accepts wires with a cross-section of 0.08 to 2.5 mm², including thin flexible stranded wires and standard solid installation wires.

The double design is suitable wherever two-core cable is used. Typical applications include extending the power supply to a light, repairing a cable damaged while drilling into a wall, or connecting an LED strip and a small appliance. One connector is all you need instead of two separate connectors, leaving more space in the installation box and keeping the connections tidy. The levers for one channel are orange and those for the other are blue, making it immediately clear which wires belong together.

  • Design – double through connector 2 x 1 to 1 with four levers
  • Nominal current – 32 A
  • Nominal voltage – 250 V
  • Wire cross-section – 0.08 to 2.5 mm²
  • Dimensions of one connector – 31.5 x 13 x 13.5 mm
  • Contacts – red copper
  • Spring – stainless steel
  • Housing – flame-retardant plastic with increased heat resistance
  • Package contents – 50 double through lever connectors

Even a less experienced DIY enthusiast can connect the wires. Strip the insulation from the end of the wire, lift the lever, insert the stripped end into the opening as far as it will go and fold the lever back down. Connect the opposite wire in the same channel in the same way, then connect the second pair of wires. If you need to change the connection, simply lift the lever again and pull out the wire. Before working on any electrical installation, switch off the relevant circuit breaker and check that no bare wire protrudes from the connector housing.

Fifty pieces in one pack are enough for a larger electrical installation renovation or as a long-term stock for your workshop or service vehicle. The compact housing, measuring 31.5 x 13 x 13.5 mm, fits into a standard installation box or beneath a light fitting cover. The red copper contacts ensure a reliable connection, and the connectors can be reused. Lever operation saves time with every connection. This is a practical consumable for electricians, maintenance workers and experienced DIY enthusiasts.

Price incl. VAT €35.76