Home page Home page Home & Household Supplies Home electrical supplies Back boxes and blanking plates Double Lever Quick-Connect Branch Connectors 50 pcs Connector 2 x 1 Input and 2 Outputs for 0.08 to 2.5 mm² Cables 32 A 250 V For Electricians
Double Lever Quick-Connect Branch Connectors 50 pcs Connector 2 x 1 Input and 2 Outputs for 0.08 to 2.5 mm² Cables 32 A 250 V For Electricians

Double Lever Quick-Connect Branch Connectors 50 pcs Connector 2 x 1 Input and 2 Outputs for 0.08 to 2.5 mm² Cables 32 A 250 V For Electricians

Bulk pack of double branch connectors with two separate 1-to-2 channels. Copper contacts and a lever for each wire allow quick connection. Full description
In stock
€46.24
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Double Lever Quick-Connect Branch Connectors 50 pcs Connector 2 x 1 Input and 2 Outputs for 0.08 to 2.5 mm² Cables 32 A 250 V For Electricians

This bulk pack contains fifty double lever branch connectors. Each connector has two separate channels in a single housing, and each channel splits one incoming wire into two outputs. This allows you to branch both the live and neutral wires at the same time, for example, with each of the six wires secured by its own lever. The connectors are rated for a current of 32 A and a voltage of 250 V. They are therefore suitable for lighting circuits, socket circuits and wiring small appliances. Installation requires no soldering, screwing or insulating tape.

The contacts inside the housing are made of red copper, which conducts electricity well and resists corrosion. The wires are pressed in place by a stainless steel spring clamp, which keeps the connection secure even after the levers have been opened repeatedly. The connector housing is made of flame-retardant plastic with increased heat resistance. The openings accept wires with a cross-section of 0.08 to 2.5 mm², including solid wires and flexible stranded wires.

The double branch design is useful when you need to split a two-core supply between two appliances and do not want to use two separate connectors. The levers for the two channels are different colours, orange and blue, so you can see at a glance which wires belong together. The connector is suitable for connecting two lights to a single supply or distributing power to LED strips. There is a small eyelet with a hole on the side of the housing.

  • Type – double lever branch connector with two channels, each with 1 input and 2 outputs
  • Rated current – 32 A
  • Rated voltage – 250 V
  • Wire cross-section – 0.08 to 2.5 mm²
  • Dimensions – 31.5 x 23 x 13.5 mm
  • Contacts – red copper
  • Spring – stainless steel
  • Housing – flame-retardant plastic with increased heat resistance
  • Operation – six levers, one for each wire
  • Pack contents – 50 double lever branch connectors, each with 2 x 1 input and 2 outputs

Connection takes three steps. Strip the insulation from the end of the wire, lift the lever for the relevant opening and insert the wire as far as it will go. Then lower the lever to secure the wire. Connect both output wires for that channel in the same way, then repeat the process for the second channel. You can disconnect the connection at any time by lifting the lever and pulling out the wire. Always switch off the power and check that no stripped wire ends protrude from the connector before carrying out any electrical work.

Fifty connectors in one pack are enough for a larger electrical installation renovation or to keep as a long-term supply in a service van. Each connector splits two wires at the same time and saves space in the junction box. Contacts made of red copper ensure a reliable connection, while the levers allow it to be taken apart at any time. Measuring 31.5 x 23 x 13.5 mm, the housing takes up very little space in the box, keeping connections neat. It is a cost-effective solution for electricians, installation companies and building maintenance.

Price incl. VAT €46.24