Home page Home page Home & Household Supplies Home electrical supplies Back boxes and blanking plates Double lever-operated branch quick connectors 50 pcs 2 x 1 input and 3 outputs for cables 0.08 to 2.5 mm² 32 A 250 V For electricians
Double lever-operated branch quick connectors 50 pcs 2 x 1 input and 3 outputs for cables 0.08 to 2.5 mm² 32 A 250 V For electricians

Double lever-operated branch quick connectors 50 pcs 2 x 1 input and 3 outputs for cables 0.08 to 2.5 mm² 32 A 250 V For electricians

Bulk pack of double branch connectors with two separate 1-to-3 channels. Copper contacts and a lever for each conductor allow quick connection. Full description
In stock
€67.64
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Double lever-operated branch quick connectors 50 pcs 2 x 1 input and 3 outputs for cables 0.08 to 2.5 mm² 32 A 250 V For electricians

This bulk pack contains fifty double lever-operated branch connectors. Each connector has two separate channels in a single housing, each splitting one incoming conductor into three outputs. This lets you split both the live and neutral conductors at the same time, for example, with an individual lever securing each of the eight conductors. The connectors are rated for a current of 32 A and a voltage of 250 V. They are therefore suitable for lighting circuits, socket circuits and connecting small appliances. Installation requires no soldering, screws or insulating tape.

The contacts inside the housing are made of red copper, which conducts electricity well and resists corrosion. A flexible stainless steel spring clip presses against the conductors, holding the connection securely even after the levers have been opened repeatedly. The connector housing is made of flame-retardant plastic with enhanced heat resistance. The openings accommodate conductors with a cross-section of 0.08 to 2.5 mm², including solid conductors and flexible stranded conductors.

The double branch design is suitable wherever you need to distribute a two-core supply to three appliances without using several separate connectors. The levers for the two channels are different colours, orange and blue, so you can see at a glance which conductors belong together. The connector is suitable for connecting three lights to one supply or distributing power to LED strips in several directions. There is a small eyelet with a hole on the side of the housing.

  • Type – double lever-operated branch connector with two channels, each with 1 input and 3 outputs
  • Rated current – 32 A
  • Rated voltage – 250 V
  • Conductor cross-section – 0.08 to 2.5 mm²
  • Dimensions – 31.5 x 33 x 13.5 mm
  • Contacts – red copper
  • Spring – stainless steel
  • Housing – flame-retardant plastic with enhanced heat resistance
  • Operation – eight levers, one for each conductor
  • Package contents – 50 double lever-operated branch connectors, each with 2 x 1 input and 3 outputs

Connect the wires in three steps. Strip the insulation from the end of the conductor, lift the lever for the relevant opening and insert the conductor fully. Then lower the lever to secure the conductor. Connect all three output conductors for that channel in the same way, then repeat the process for the second channel. You can disconnect the connection at any time by lifting the lever and pulling out the conductor. Always switch off the power before working on electrical wiring and check that no stripped ends protrude from the connector.

Fifty connectors in one pack are enough for a larger electrical rewiring project or to keep as a long-term stock in a service vehicle. Each connector splits two conductors in up to three directions at the same time, saving space in the junction box. Contacts made of red copper provide a reliable connection, while the levers let you disconnect it at any time. The housing measures 31.5 x 33 x 13.5 mm, taking up little space in the box and keeping connections neat. This is a practical solution for electricians, installation companies and building maintenance teams.

Price incl. VAT €67.64