Home page Home page Home & Household Supplies Home electrical supplies Back boxes and blanking plates Double Lever-Operated Branch Connectors 30 pcs Connector 2 x 1 Input and 3 Outputs for 0.08 to 2.5 mm² Cross-Section 32 A 250 V Copper For Home
Double Lever-Operated Branch Connectors 30 pcs Connector 2 x 1 Input and 3 Outputs for 0.08 to 2.5 mm² Cross-Section 32 A 250 V Copper For Home

Double Lever-Operated Branch Connectors 30 pcs Connector 2 x 1 Input and 3 Outputs for 0.08 to 2.5 mm² Cross-Section 32 A 250 V Copper For Home

Thirty double branch connectors for distributing a two-core supply to three appliances. Eight levers, copper contacts and tool-free installation. Full description
In stock
€45.81
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Double Lever-Operated Branch Connectors 30 pcs Connector 2 x 1 Input and 3 Outputs for 0.08 to 2.5 mm² Cross-Section 32 A 250 V Copper For Home

This value pack contains thirty double lever-operated branch connectors. Each connector has two separate channels in one body, and each channel distributes one incoming conductor to three outputs. You can therefore branch both the live and neutral conductors at the same time, with each of the eight conductors secured by its own lever. The connectors are rated for a current of 32 A and a voltage of 250 V. They are therefore suitable for lighting circuits, socket circuits and wiring small appliances. Installation requires no soldering, screws or insulating tape.

The contact section is made of red copper, which provides good conductivity and resists corrosion. A flexible stainless steel spring clamp grips the conductor and retains its elasticity even after being opened many times. The housing is made of flame-retardant plastic with increased heat resistance. The connector accepts conductors with a cross-section of 0.08 to 2.5 mm², from fine-stranded wire to standard installation wire.

The double branching design is ideal when you need to distribute a two-core supply to three appliances without using several separate connectors. The levers for the two channels are different colours, orange and blue, so you can easily see which conductors belong together. The connector is suitable for connecting three lights to one supply or distributing power to LED strips in several directions. There is a small eyelet with a hole on the side of the housing.

  • Type – double lever-operated branch connector with two channels, each with 1 input and 3 outputs
  • Rated current – 32 A
  • Rated voltage – 250 V
  • Conductor cross-section – 0.08 to 2.5 mm²
  • Dimensions – 31.5 x 33 x 13.5 mm
  • Contacts – red copper
  • Spring – stainless steel
  • Body – flame-retardant plastic with increased heat resistance
  • Operation – eight levers, one for each conductor
  • Package contents – 30 double lever-operated branch connectors, each with 2 x 1 input and 3 outputs

Wiring is straightforward. Strip the end of the conductor, lift the lever, insert the conductor into the opening as far as it will go, then lower the lever. Connect all three output conductors for that channel in the same way, then repeat the process for the second channel. To change the wiring, simply lift the lever again and remove the conductor. Always switch off the circuit breaker for the relevant circuit before starting work, and check that the entire stripped end of the conductor is inside the connector.

The pack of thirty is enough for rewiring an entire flat or for keeping in the workshop as spares. One connector branches two conductors in up to three directions at the same time, saving space in the junction box. Connectors with red copper contacts provide a reliable, tool-free connection and can be reused. The housing, measuring 31.5 x 33 x 13.5 mm, fits into a standard installation box or under a light fitting cover. A practical consumable for the workshop, home or service case.

Price incl. VAT €45.81