Home page Home page Home & Household Supplies Home electrical supplies Back boxes and blanking plates Double Feed-Through Quick Wire Connectors 10 pcs Lever Connector 2 x 1-to-1 for Cross-Sections 0.08 to 2.5 mm² 32 A 250 V Copper Contacts Screwless
Double Feed-Through Quick Wire Connectors 10 pcs Lever Connector 2 x 1-to-1 for Cross-Sections 0.08 to 2.5 mm² 32 A 250 V Copper Contacts Screwless

Double Feed-Through Quick Wire Connectors 10 pcs Lever Connector 2 x 1-to-1 for Cross-Sections 0.08 to 2.5 mm² 32 A 250 V Copper Contacts Screwless

Double lever connectors join two pairs of wires side by side in a single housing without soldering. Copper contacts and a stainless steel spring for domestic electrical installations. Full description
In stock
€12.18
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Double Feed-Through Quick Wire Connectors 10 pcs Lever Connector 2 x 1-to-1 for Cross-Sections 0.08 to 2.5 mm² 32 A 250 V Copper Contacts Screwless

The pack contains ten double feed-through quick connectors with levers. Each connector has two separate channels side by side in a single housing, so it joins two pairs of wires at once, for example the live and neutral wires of a severed cable. Each of the four wires is secured by its own lever and can be released again at any time. The connector is rated for a current of 32 A and a voltage of 250 V. Work without soldering, screws or insulating tape.

The contacts inside the connector are made of red copper, which conducts electricity well and resists corrosion. The wires are held in place by a flexible stainless steel spring clamp that keeps the connection secure even after the levers have been opened repeatedly. The housing is made of flame-retardant plastic with increased heat resistance. The connector accepts wires with a cross-section of 0.08 to 2.5 mm² and measures 31.5 x 13 x 13.5 mm.

The double design is ideal wherever two wires run alongside each other and need to be extended or repaired at the same time. One connector is all you need instead of two separate connectors, keeping the wiring in the junction box neat and organised. The levers for the two channels are different colours, orange and blue, making them easier to identify when wiring. The connector works with both solid-core wires and flexible stranded wires.

  • Type – double feed-through lever connector with two 1-to-1 channels
  • Rated current – 32 A
  • Rated voltage – 250 V
  • Wire cross-section – 0.08 to 2.5 mm²
  • Dimensions – 31.5 x 13 x 13.5 mm
  • Contacts – red copper
  • Spring – stainless steel
  • Housing – flame-retardant plastic
  • Operation – four levers, one for each wire
  • Pack contents – 10 double feed-through lever connectors

Connection takes three steps. Strip the insulation from the end of the wire, lift the lever for the relevant opening and insert the wire as far as it will go. Then lower the lever to secure the wire. Connect the remaining wires in the same way, inserting them opposite each other into the same channel. You can disconnect the connection at any time by lifting the lever and pulling out the wire. Always switch off the power and check that no stripped wire ends protrude from the connector before carrying out any work on the electrical installation.

This set of ten double connectors is a practical supply for the home or workshop, whether you are repairing a lamp cable, extending a cable to an LED strip or connecting wires when replacing a light fitting. One connector replaces two separate feed-through connectors and saves space in the junction box. The red copper contacts provide a reliable connection without tools. The grey housing with coloured levers is easy to see among other wires. It is a quick and neat solution for anyone who needs to connect two wires at the same time.

Price incl. VAT €12.18