Home page Home page Home & Household Supplies Home electrical supplies Back boxes and blanking plates Double Branching Quick Connectors 10 pcs Lever Connector 2 x 1 Input and 2 Outputs for 0.08 to 2.5 mm² Conductors 32 A 250 V Copper Screwless
Double Branching Quick Connectors 10 pcs Lever Connector 2 x 1 Input and 2 Outputs for 0.08 to 2.5 mm² Conductors 32 A 250 V Copper Screwless

Double Branching Quick Connectors 10 pcs Lever Connector 2 x 1 Input and 2 Outputs for 0.08 to 2.5 mm² Conductors 32 A 250 V Copper Screwless

Double branching connectors with levers distribute the live and neutral wires in two directions at once. Copper contacts and colour-coded channels, with no soldering required. Full description
In stock
€14.37
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Double Branching Quick Connectors 10 pcs Lever Connector 2 x 1 Input and 2 Outputs for 0.08 to 2.5 mm² Conductors 32 A 250 V Copper Screwless

The pack contains ten double lever-operated branching connectors. Each connector has two separate channels in a single body, and each channel splits one incoming wire into two outputs. This allows you to branch both the live and neutral wires at the same time, for example, with each of the six wires secured by its own lever. The connectors are rated for a current of 32 A and a voltage of 250 V. They are therefore suitable for lighting circuits, socket circuits and wiring small appliances. Installation requires no soldering, screwing or insulating tape.

Inside the connector are contacts made of red copper, offering good conductivity and corrosion resistance. The wires are held in place by a spring clip made of stainless steel, which keeps the connection secure even after the levers have been opened repeatedly. The body is made of flame-retardant plastic with increased resistance to high temperatures. The connector accepts wires with a cross-section of 0.08 to 2.5 mm², including solid single-core wires and flexible stranded wires.

The double branching design is ideal when you need to split a two-core supply to two appliances and do not want to use two separate connectors. The levers for the two channels are different colours, orange and blue, so you can see at a glance which wires belong together. The connector is suitable for connecting two light fittings to one supply or distributing power to LED strips. There is a small eyelet with a hole on the side of the housing.

  • Type – double lever-operated branching connector with two channels, each with 1 input and 2 outputs
  • Rated current – 32 A
  • Rated voltage – 250 V
  • Wire cross-section – 0.08 to 2.5 mm²
  • Dimensions – 31.5 x 23 x 13.5 mm
  • Contacts – red copper
  • Spring – stainless steel
  • Body – flame-retardant plastic with increased heat resistance
  • Operation – six levers, one for each wire
  • Pack contents – 10 double lever-operated branching connectors, each with 2 x 1 input and 2 outputs

Installation is straightforward, even for less experienced DIY enthusiasts. First, strip the insulation from the end of the wire, then lift the lever and insert the stripped end into the opening as far as it will go. Finally, lower the lever to secure the wire. Connect both output wires of that channel in the same way, then repeat the process for the second channel. If you need to disconnect the connection, simply lift the lever again and pull out the wire. Always disconnect the power before carrying out any electrical work, and make sure that no bare wire extends beyond the connector body.

The pack of ten is suitable for minor electrical installation work in a flat, garage or holiday cottage. One connector branches two wires at the same time and saves space in the junction box. The red copper contacts provide a reliable tool-free connection, and the connectors can be reused. The compact housing, measuring 31.5 x 23 x 13.5 mm, fits even in a smaller junction box. A practical solution for electricians, maintenance workers and experienced DIY enthusiasts.

Price incl. VAT €14.37