Home page Home page PC & Laptop Accessories PC Components Hard Drives Docking Station for 2 M.2 NVMe SSDs with RGB Lighting and Offline Cloning USB-C 20 Gb/s Drives 2230 to 22110 up to 8 TB for PC and Mac
Docking Station for 2 M.2 NVMe SSDs with RGB Lighting and Offline Cloning USB-C 20 Gb/s Drives 2230 to 22110 up to 8 TB for PC and Mac

Docking Station for 2 M.2 NVMe SSDs with RGB Lighting and Offline Cloning USB-C 20 Gb/s Drives 2230 to 22110 up to 8 TB for PC and Mac

The dual dock with a colourful RGB frame clones NVMe drives without a computer. It reads two drives at once via USB-C, shows copying progress and has its own power supply. Full description
In stock
€138.38
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Docking Station for 2 M.2 NVMe SSDs with RGB Lighting and Offline Cloning USB-C 20 Gb/s Drives 2230 to 22110 up to 8 TB for PC and Mac

The docking station for two M.2 NVMe SSDs combines fast drive connectivity with a striking rainbow RGB glow around the edge of the top panel. Drives slot vertically into the two bays, and the station makes them available to a computer via the USB-C connector at speeds of up to 20 Gb/s. With its offline cloning function, it copies an entire drive even when the computer is switched off. It is suitable for backups, upgrading to a larger drive or working with multiple drives at once. The colourful lighting gives your desk or gaming area a modern look.

The station supports 2230, 2242, 2260, 2280 and 22110 drives, and each slot accommodates a drive with a capacity of up to 4 TB, for a total of up to 8 TB. It works with NVMe PCIe drives with an M or B+M key and does not support SATA drives. It works without drivers on Windows, macOS, Linux and Android, so simply connect it and the drives are immediately available.

  • Type – docking station for 2 M.2 NVMe SSDs with RGB lighting
  • Interface – USB 3.2 Gen 2x2 with a USB-C connector
  • Data transfer speed – up to 20 Gb/s
  • Lighting – rainbow RGB frame around the edge of the top panel
  • Supported drives – M.2 NVMe PCIe with an M or B+M key
  • Drive sizes – 2230, 2242, 2260, 2280 and 22110
  • Capacity – up to 4 TB per slot, up to 8 TB in total
  • Cloning – offline from drive A in the front slot to drive B in the rear slot
  • Progress indicator – four lights at 25%, 50%, 75% and 100%
  • Power supply – 5 V 3 A adapter with a European plug
  • Material – dark grey plastic
  • Base dimensions – 102 x 66 mm
  • Operating systems – Windows, macOS, Linux and Android
  • Package contents – docking station, 5 V 3 A power adapter with a European plug and 2-in-1 data cable with USB-C and USB-A connectors, drives not included

For cloning, insert the source drive into front slot A and the destination drive into rear slot B; the destination drive must have a larger capacity. Disconnect the data cable from the computer, connect the power adapter and start copying by holding down the button. The progress lights illuminate in quarter increments, and all four remain lit when copying is complete. The contents of the destination drive will be overwritten, so it is best to clear it beforehand. If cloning is interrupted, the station must be restarted and copying started again. The station heating up when working with large drives is normal, and the open slot design helps dissipate heat.

This docking station offers fast access to two NVMe drives via USB-C and standalone drive copying without a computer. Its wide format support, including long 22110 drives, makes it a versatile tool for backups and servicing. The dedicated power adapter maintains stable performance even when both slots are fully loaded. Non-slip feet keep the station firmly in place, while the RGB frame sets it apart from standard docks. It is ideal for gamers, content creators and anyone who regularly works with drives.

Price incl. VAT €138.38