Home page Home page PC & Laptop Accessories PC Components Hard Drives Docking Station for 2 M.2 NVMe SSDs with Offline Cloning USB-C 20 Gb/s Drives 2230 to 22110 up to 8 TB Dark Grey for PC and Mac
Docking Station for 2 M.2 NVMe SSDs with Offline Cloning USB-C 20 Gb/s Drives 2230 to 22110 up to 8 TB Dark Grey for PC and Mac

Docking Station for 2 M.2 NVMe SSDs with Offline Cloning USB-C 20 Gb/s Drives 2230 to 22110 up to 8 TB Dark Grey for PC and Mac

Dual dock for NVMe drives copies an entire drive without a computer. Fast USB-C connection, progress indicators and power adapter included. Full description
In stock
€115.24
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Docking Station for 2 M.2 NVMe SSDs with Offline Cloning USB-C 20 Gb/s Drives 2230 to 22110 up to 8 TB Dark Grey for PC and Mac

This docking station for two M.2 NVMe SSDs is a practical accessory for anyone who works with multiple drives at once. Simply insert both drives vertically into the slots on the top, and the station connects them to a computer via the USB-C connector at transfer speeds of up to 20 Gb/s. In addition to standard read and write functions, the station also supports offline cloning, copying an entire drive without a computer being switched on. It is ideal for backing up data, upgrading to a larger drive or quickly swapping drives without opening the computer case. The plastic body has a dark grey finish and a simple design that fits neatly on any desk.

The station accommodates drives in 2230, 2242, 2260, 2280 and 22110 formats, so it works with both small drives from handheld devices and longer drives from workstations. Each slot supports a drive with a capacity of up to 4 TB, giving a total capacity of up to 8 TB. NVMe PCIe drives with an M or B+M key are supported; SATA drives are not. No drivers are required, and the station works with Windows, macOS, Linux and Android.

  • Type – docking station for 2 M.2 NVMe SSDs with offline cloning function
  • Interface – USB 3.2 Gen 2x2 with USB-C connector
  • Transfer speed – up to 20 Gb/s
  • Supported drives – M.2 NVMe PCIe with an M or B+M key
  • Drive sizes – 2230, 2242, 2260, 2280 and 22110
  • Capacity – up to 4 TB per slot, up to 8 TB in total
  • Cloning – without a computer, from drive A in the front slot to drive B in the rear slot
  • Indicators – four progress indicators at 25%, 50%, 75% and 100%
  • Power supply – 5 V 3 A adapter with European plug
  • Material – plastic
  • Base dimensions – 102 x 66 mm
  • Compatibility – Windows, macOS, Linux and Android
  • Package contents – docking station, 5 V 3 A power adapter with European plug and 2-in-1 data cable with USB-C and USB-A connectors; drives are not included

Cloning is simple. Insert the source drive into front slot A and the target drive into rear slot B, which must have a larger capacity than the source drive. Before starting the copy, disconnect the data cable from the computer and connect the power adapter. Press and hold the copy button to start the process; the indicators show progress in quarter increments. Once 100% is reached, all four indicators remain lit. Cloning overwrites the data on the target drive, so it is best to erase it beforehand. Do not switch off or disconnect the station during copying; if the process is interrupted, cloning must be started again. The station heats up during extended use, which is normal with large drives, and the open slot design helps dissipate heat.

The docking station offers a fast connection for two NVMe drives via USB-C, as well as the ability to copy drives independently without a computer. Its broad format support, from 2230 to 22110, makes it suitable for home users, service technicians and photographers with large archives. The power adapter ensures stable performance even when both slots are fully loaded. Non-slip feet keep the station firmly in place on the desk, while the drives remain easily accessible.

Price incl. VAT €115.24