Home page Home page Hobbies & Garden Tools Soldering Irons & Accessories DIY Circular Running Light Kit with NE555 and CD4017 Circuits Ten Red LEDs Trimmer and Power Cable Soldering Kit
DIY Circular Running Light Kit with NE555 and CD4017 Circuits Ten Red LEDs Trimmer and Power Cable Soldering Kit

DIY Circular Running Light Kit with NE555 and CD4017 Circuits Ten Red LEDs Trimmer and Power Cable Soldering Kit

Circular board with ten red LEDs that run in a circle. NE555 timer, CD4017 counter, and trimmer for effect speed included in the DIY soldering kit. Full description
In stock
€5.20
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
DIY Circular Running Light Kit with NE555 and CD4017 Circuits Ten Red LEDs Trimmer and Power Cable Soldering Kit

The DIY circular running light kit is a soldering kit where the light gradually moves along the LEDs arranged in a circle. The effect is controlled by a pair of integrated circuits, with the NE555 timer generating regular pulses and the CD4017 counter switching the individual outputs in sequence. The result is a light point that smoothly moves around the edge of the circular board. The kit is supplied as loose components for soldering, allowing you to assemble the entire circuit from a blank board to a functional effect. It is suitable for beginners, students, and hobbyists who wish to practice soldering on an interesting and visually impressive project.

On the circular printed circuit board, there are 10 red LEDs arranged around the perimeter, with both integrated circuits, resistors, an electrolytic capacitor, and a blue trimmer located in the centre. The speed at which the light moves is adjusted using the trimmer in the timer circuit. Power is connected via a connector with a cable, so there is no need to solder wires directly onto the board. There are mounting holes around the edge of the board, making it easy to secure the finished circuit into a box or decoration. The positions of the components are marked by printing, so you can easily orient yourself when populating the board.

  • Type – DIY circular running light kit
  • Control Circuits – NE555 timer and CD4017 counter
  • Light Effect – 10 red LEDs arranged in a circle
  • Adjustment – trimmer for light running speed
  • Power Connection – connector with cable
  • Board – circular with mounting holes
  • Execution – loose components for soldering and assembly
  • Package Contents – circular printed circuit board and component set (NE555 and CD4017 circuits, 10 red LEDs, trimmer, electrolytic capacitor, resistors, connector with power cable)

When assembling, start with the resistors, then proceed with the integrated circuits, trimmer, capacitor, and connector, and finally solder the LEDs. Pay attention to the orientation of both integrated circuits according to the notch on the package, the polarity of the electrolytic capacitor, and the correct connection of the LEDs. After soldering, check all connections and remove any residual flux and possible solder bridges. Then connect the power and adjust the speed to your liking by turning the trimmer. If the effect does not work, first check the orientation of the integrated circuits and the quality of the individual soldered joints.

The DIY circular running light kit is a rewarding project where you can practically experience the collaboration between a timer and a counter. The running light on the circular board looks impressive, and the finished circuit can serve as a small decoration or as a demonstration for school or an electronics club. Thanks to the adjustable speed, you can customise the effect to your preference. The CD4017 counter has ten outputs, so each of the ten LEDs corresponds to one step of the running effect. The kit is suitable for both novice and moderately advanced hobbyists. It is a practical way to combine soldering practice with an understanding of the principles of digital circuits.

Price incl. VAT €5.20