LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Hobbies & Garden Tools Grinders & Accessories Diamond Cutting Disc 115 mm Sintered Thickness 1 mm Bore 22.23 mm For Angle Grinder Green Cutting Sintered Stone Marble and Glass
Diamond Cutting Disc 115 mm Sintered Thickness 1 mm Bore 22.23 mm For Angle Grinder Green Cutting Sintered Stone Marble and Glass
Diamond Cutting Disc 115 mm Sintered Thickness 1 mm Bore 22.23 mm For Angle Grinder Green Cutting Sintered Stone Marble and Glass 1
Diamond Cutting Disc 115 mm Sintered Thickness 1 mm Bore 22.23 mm For Angle Grinder Green Cutting Sintered Stone Marble and Glass 1
Diamond Cutting Disc 115 mm Sintered Thickness 1 mm Bore 22.23 mm For Angle Grinder Green Cutting Sintered Stone Marble and Glass 2
Diamond Cutting Disc 115 mm Sintered Thickness 1 mm Bore 22.23 mm For Angle Grinder Green Cutting Sintered Stone Marble and Glass 3
Diamond Cutting Disc 115 mm Sintered Thickness 1 mm Bore 22.23 mm For Angle Grinder Green Cutting Sintered Stone Marble and Glass 4
Diamond Cutting Disc 115 mm Sintered Thickness 1 mm Bore 22.23 mm For Angle Grinder Green Cutting Sintered Stone Marble and Glass 5
Diamond Cutting Disc 115 mm Sintered Thickness 1 mm Bore 22.23 mm For Angle Grinder Green Cutting Sintered Stone Marble and Glass 6

Diamond Cutting Disc 115 mm Sintered Thickness 1 mm Bore 22.23 mm For Angle Grinder Green Cutting Sintered Stone Marble and Glass

Sintered diamond disc 115 mm with a thickness of 1 mm and a bore of 22.23 mm for angle grinders. Cuts and grinds sintered stone, marble, tiles, glass, and quartz. Full description
In stock
€23.10
Safe shopping Safe shopping
Overview
Diamond Cutting Disc 115 mm Sintered Thickness 1 mm Bore 22.23 mm For Angle Grinder Green Cutting Sintered Stone Marble and Glass

The diamond cutting disc with a diameter of 115 mm is designed for cutting and grinding hard and brittle materials using an angle grinder. The disc has a thickness of just 1 mm and a bore of 22.23 mm, allowing it to create a narrow cut with minimal material waste. The steel core made from high manganese steel is coated on both sides with a layer of diamond grains applied using double-sided soldering technology. This enables the disc to both cut and grind, leaving the edges of the cut material clean without chipping. It is suitable for large format sintered stone slabs, marble, ceramic tiles, glass, jade, and quartz stone. It is ideal for tilers, stonemasons, and DIY enthusiasts during kitchen or bathroom renovations.

  • Diameter – 115 mm.
  • Thickness – 1 mm for a thin and precise cut.
  • Bore – 22.23 mm.
  • Construction – core made from high manganese steel with double-sided soldered diamond grains.
  • Maximum RPM – 12,800 rpm, peripheral speed 80 m/s.
  • Materials – sintered stone, marble, ceramics, tiles, glass, jade, and quartz stone.
  • Colour – green.
  • Package Contents – 1 piece of 115 mm diamond cutting disc.

Before use, ensure that the maximum RPM of the grinder does not exceed 12,800 rpm as indicated on the disc, and securely tighten the disc with the clamping nut. When cutting, guide the grinder straight and without lateral pressure; the thin disc is not intended for prying or bending during the cut. Thanks to the diamond layer on both sides, the disc can also be used to trim and grind the edges of tiles or stone slabs. For very hard materials, proceed slowly and allow the disc to work at its own pace to prevent the soldered diamond layer from overheating unnecessarily. Always use the grinder's protective cover, safety glasses, gloves, and a respirator, as fine dust is generated when cutting stone and ceramics. Securely clamp or place the material on a stable surface.

The 115 mm diamond cutting disc is a practical tool for anyone working with tiles, paving, or stone slabs. Its thin profile of 1 mm allows for quick and precise cuts, and thanks to the double-sided soldering of the diamond, the disc can also handle edge grinding. It is suitable for finishing worktops, window sills, tiles, and glass components, and it is advisable to keep a spare in the workshop. The disc is designed for angle grinders with a bore of 22.23 mm, and its distinctive green colour makes it easy to find in the workshop. With this one tool, you can cover cutting sintered stone, marble, and tiles as well as fine edge finishing. The result is clean cuts without burrs and chipped edges, which will be appreciated by every tiler and DIY enthusiast.

Price incl. VAT €23.10