Home page Home page Hobbies & Garden Tools Drills & Accessories Drill Bits Diamond core bit 16 mm Brazed diamond Hex shank 6.35 mm Overall length 80 mm Dry drilling of holes in tiles and granite
Diamond core bit 16 mm Brazed diamond Hex shank 6.35 mm Overall length 80 mm Dry drilling of holes in tiles and granite

Diamond core bit 16 mm Brazed diamond Hex shank 6.35 mm Overall length 80 mm Dry drilling of holes in tiles and granite

One 16 mm diameter hole without pre-drilling or water. The brazed diamond segment cuts through ceramic and vitrified tiles, marble and granite with ease. Full description
In stock
€9.56
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Diamond core bit 16 mm Brazed diamond Hex shank 6.35 mm Overall length 80 mm Dry drilling of holes in tiles and granite

This 16 mm diameter diamond core bit is designed for larger holes in ceramic floor tiles, wall tiles and natural stone. The brazed diamond segment removes material dry and without pre-drilling, so you can make the hole with a single tool. The core bit has a 6.35 mm hex shank and fits both cordless drills and impact drivers. Its overall length of 80 mm and 42 mm working length provide plenty of room for thicker tiles with adhesive. There is a clear scale on the body to help you monitor the drilling depth as you work.

The 16 mm diameter is suitable for cable and tubing passages and for anchors for larger brackets. The hollow design removes only a ring of material, with the drilled core remaining inside the bit, so the drill requires less force. The diamond is permanently bonded to the face, allowing the core bit to handle even vitrified tiles, which a masonry bit would only polish. Drill without hammer action and without water cooling, ideal for anyone fitting items in a finished bathroom. The 42 mm working length passes through the tile and adhesive layer in one go, so there is no need to finish the hole with another tool.

  • Diameter – 16 mm
  • Type – hollow core drill bit with brazed diamond
  • Shank – 6.35 mm hex
  • Overall length – 80 mm
  • Working length – 42 mm
  • Material – steel body with diamond segment
  • Drilling method – dry, without water cooling
  • Suitable for – ceramic floor tiles, wall tiles, vitrified tiles, marble and granite
  • Package contents – 1 diamond core bit, 16 mm diameter

Start the hole at a slight angle and, once the diamond has bitten, straighten the core bit to a perpendicular position. Apply only light pressure and let the tool work at its own speed. Every few seconds, pull the bit back slightly to clear dust from the hole and cool the face. After use, tap out the drilled core and store the bit dry and separately from other tools. On glazed wall tiles, a piece of masking tape can help prevent the tool from slipping. If drilling into tiles on a wall, work from the bottom upwards so that dust falls away from the hole.

The core bit is suitable for fitting brackets, shelves and taps, as well as for passages for guide tubes. The 16 mm diameter accommodates the wall plugs and anchors most commonly used for heavier brackets. As drilling is done dry, there is no need for a water container, and the work leaves only dust behind. The hex shank holds firmly even in an impact driver, and the tool can be changed in moments. Regular cleaning of the face helps keep the diamond layer sharp for many holes. The core bit is suitable for the workshop and for tradespeople who regularly drill tiles and need precise results without cracks.

Price incl. VAT €9.56