Home page Home page Hobbies & Garden Development boards Development board ESP32-S3 Touch AMOLED display 1.8" 368 x 448 px Wi-Fi and Bluetooth 5 Battery Black case For programmable watches
Development board ESP32-S3 Touch AMOLED display 1.8" 368 x 448 px Wi-Fi and Bluetooth 5 Battery Black case For programmable watches

Development board ESP32-S3 Touch AMOLED display 1.8" 368 x 448 px Wi-Fi and Bluetooth 5 Battery Black case For programmable watches

Programmable module with an AMOLED display in a compact case with a Li-ion battery. Gyroscope and real-time clock for Arduino IDE and ESP-IDF projects. Full description
In stock
€100.83
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Development board ESP32-S3 Touch AMOLED display 1.8" 368 x 448 px Wi-Fi and Bluetooth 5 Battery Black case For programmable watches

The ESP32-S3-Touch-AMOLED-1.8 development board combines a powerful microcontroller and a high-quality touchscreen in one compact device. At the heart of the module is a dual-core ESP32-S3R8 chip clocked at 240 MHz, complemented by 8 MB of PSRAM and 16 MB of flash memory. The 1.8" display uses AMOLED technology with a resolution of 368 x 448 px and can display up to 16.7 million colours. All the electronics are housed in a black case with buttons, a memory card slot and a USB-C connector. This makes the board suitable as the basis for programmable watches, a small information panel or a voice assistant.

The capacitive touchscreen responds to fingers and allows you to create your own control interface. The display has a brightness of 350 cd/m², a contrast ratio of 100000:1 and a viewing angle of 178°, so the image remains legible even when viewed from the side. For wireless projects, the module offers 2.4 GHz Wi-Fi and Bluetooth 5 LE, with an antenna built directly into the board. The built-in microphone and speaker with an ES8311 audio codec allow you to record and play audio, so the board can also handle voice control connected to online language models. The six-axis QMI8658 sensor, with gyroscope and accelerometer, detects the device's movement and orientation.

  • Processor – ESP32-S3R8 dual-core 32-bit Xtensa LX7 240 MHz
  • Memory – 8 MB PSRAM and 16 MB NOR flash
  • Display – 1.8" touchscreen AMOLED 368 x 448 px 16.7 million colours
  • Display specifications – brightness 350 cd/m² contrast ratio 100000:1 QSPI interface SH8601 controller
  • Touchscreen – FT3168 / FT6146 capacitive controller
  • Wireless connectivity – 2.4 GHz Wi-Fi 802.11 b/g/n and Bluetooth 5 LE
  • Sensors and chips – QMI8658 six-axis sensor PCF85063 real-time clock AXP2101 power management
  • Audio – ES8311 codec built-in microphone and speaker
  • Interfaces – USB-C TF card slot BOOT and PWR buttons exposed GPIO pins with 1 mm pitch
  • Power supply – 3.7 V Li-ion battery with MX1.25 connector charging via USB-C
  • Development environment – Arduino IDE and ESP-IDF
  • Dimensions – 37.6 x 45.2 x 15 mm
  • Package contents – development board with display in a black case and Li-ion battery

Programming is carried out via the USB-C port, which is used both for uploading firmware and displaying debugging information. Developers can use the free ESP-IDF environment, which supports the VSCode and Eclipse editors, or the simpler Arduino IDE, which is also suitable for beginners. The power management circuit handles charging and discharging the connected battery, and the PWR button can be used to switch the device on or off, or assigned a custom function. The real-time clock keeps accurate time, and a pad for a backup battery is also provided on the board to power it while the main cell is being replaced.

The module is suitable for teaching programming, home automation, smart controllers, displaying sensor data or developing your own wearable devices. Its compact dimensions of 37.6 x 45.2 x 15 mm and built-in battery make it a portable device that works without a cable. The TF card slot expands storage for images, audio or data recordings. With its combination of display, audio, motion sensor and wireless connectivity, the board provides everything needed in one case to prototype a smartwatch or small control panel.

Price incl. VAT €100.83