LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · support in English · Contact Us

Home page Home page PC & Laptop Accessories PC Components RAM modules Desktop RAM Memory DDR4 8 GB 3200 MHz PC4-25600 DIMM 288 Pins Non-ECC in Black for PCs with Intel and AMD Motherboards
Desktop RAM Memory DDR4 8 GB 3200 MHz PC4-25600 DIMM 288 Pins Non-ECC in Black for PCs with Intel and AMD Motherboards

Desktop RAM Memory DDR4 8 GB 3200 MHz PC4-25600 DIMM 288 Pins Non-ECC in Black for PCs with Intel and AMD Motherboards

Frequency 3200 MHz, capacity 8 GB and voltage 1.2 V in a single DIMM module. Suitable for desktop DDR4 slots on both Intel and AMD motherboards. Full description
In stock
€143.62
Safe shopping Safe shopping
Overview
Desktop RAM Memory DDR4 8 GB 3200 MHz PC4-25600 DIMM 288 Pins Non-ECC in Black for PCs with Intel and AMD Motherboards

Desktop RAM memory DDR4 with a clock speed of 3200 MHz will complement or replace the RAM in your desktop computer. One module offers a capacity of 8 GB and a speed of PC4-25600, providing a theoretical bandwidth of up to 25,600 MB/s. The frequency of 3200 MHz is the highest standard speed defined by the DDR4 specification without overclocking. The memory comes in the form of a DIMM module with 288 contacts and fits into DDR4 slots on both Intel and AMD motherboards. The entire body of the module is concealed under a black cover.

  • Frequency 3200 MHz – a higher clock speed means greater bandwidth between the memory and the processor. This is particularly beneficial for the integrated graphics of the processor, which uses the RAM as video memory. On motherboards with a lower supported maximum, the module operates at a lower frequency.
  • Capacity 8 GB – this volume is suitable for typical home and study use, including working with documents, spreadsheets, emails, and web applications. If there is a free slot, the computer's capacity can later be expanded with another module. In pairs with an identical piece, a total of 16 GB is achieved, which will benefit gamers or those working with graphics.
  • Power Voltage – the module operates at 1.2 V, which corresponds to the DDR4 specification for this speed. The motherboard automatically takes the default parameters from the memory, so manual adjustments to the settings are usually not necessary.
  • Contact Bar – 288 pins are divided by a notch, the position of which corresponds to the keying of DDR4 slots. The module can only be inserted in one direction and does not fit into DDR3 or DDR5 slots. There are side notches at both ends of the module, into which the slot's latches will click after insertion.
  • No Error Correction – the non-ECC design is intended for standard desktop computers. The ECC variant is primarily used for servers and requires a compatible motherboard and processor.
  • Compatibility – the memory is designed for motherboards with Intel and AMD processors that have DDR4 DIMM slots. It is advisable to check the supported frequency and maximum capacity per slot in the motherboard documentation before ordering.
  • Black Finish – the black cover with a shaped top edge conceals almost the entire module and protects the chips during installation and handling.

Package Contents:

  • 1x DDR4 RAM Module 8 GB 3200 MHz

The DDR4 module with a frequency of 3200 MHz is particularly suitable for setups where RAM speed affects performance, such as with processors that have integrated graphics. According to the designation PC4-25600, a matching piece for dual-channel configuration can be easily found. Before installation, it is necessary to turn off the computer and disconnect it from the power supply, then the module should be pressed vertically into the slot. The non-ECC design corresponds to the standard for home, study, and gaming computers. To check, simply find the DDR4 support and the maximum memory frequency in the motherboard manual.

Delivery and Returns
Price incl. VAT €143.62