Home page Home page Auto & Moto Car Care Products Car Protection & Restoration Dent Repair Kit Without Painting Pulling Bridge 18 x 13 cm with Adjustable Feet and 18 Pulling Attachments Gold For Cars
Dent Repair Kit Without Painting Pulling Bridge 18 x 13 cm with Adjustable Feet and 18 Pulling Attachments Gold For Cars

Dent Repair Kit Without Painting Pulling Bridge 18 x 13 cm with Adjustable Feet and 18 Pulling Attachments Gold For Cars

Dent puller for hail and impact dents. Bridge with lever handle and metal spring, attachments in three shapes and six sizes for the bodywork. Full description
In stock
€32.27
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Dent Repair Kit Without Painting Pulling Bridge 18 x 13 cm with Adjustable Feet and 18 Pulling Attachments Gold For Cars

The pulling bridge with 18 pulling attachments is a practical kit for repairing smaller and larger dents on the car body without the need for painting. The bridge measures 18 x 13 cm and stands on two feet with a rubber base, which rest against the metal around the damaged area. The pulling attachment is glued with hot glue to the centre of the dent, the bridge is placed on it, and by pressing the handle, the metal is gradually pulled back. The entire repair takes place from the outside, so there is no need to dismantle the upholstery or other parts of the vehicle. The kit is suitable for DIY enthusiasts as well as for minor repairs in the workshop.

The feet of the bridge are adjustable. When pulling a large dent, they are rotated outward, and the bridge is positioned further away from the damaged area; for small dents, they move closer to the centre. In the middle of the bridge is a metal spring and a rotating screw at the top, which fine-tunes the pull. The long handle serves as a lever, so pulling does not require much force, and the metal can be pulled in small steps. Eighteen blue attachments are divided into three rows by shape: round, octagonal, and elongated, always in six sizes from smallest to largest. This allows for the selection of an attachment that best matches the specific dent in both shape and size.

  • Type – pulling bridge for dent repair without painting
  • Bridge dimensions – 18 x 13 cm
  • Foot length – 8 cm
  • Feet – adjustable for large and small dents with a rubber base
  • Pulling attachments – 18 pcs in round, octagonal, and elongated shapes in six sizes
  • Colour – gold bridge and blue attachments
  • Method of use – attachment is glued with hot glue and pulled with the bridge
  • Package contents – pulling bridge, 18 pulling attachments, and instructions

Before repair, it is advisable to clean and degrease the surface around the dent. Glue from a hot glue gun is applied to the chosen attachment, the attachment is pressed onto the centre of the dent, and the glue is allowed to cool for about 5 minutes. Then, the bridge is placed on, and the metal is pulled until the dent disappears. Residual glue can be released with alcohol and carefully wiped off with a plastic scraper. If the dent does not level out on the first attempt, the process can simply be repeated. The hot glue gun, glue sticks, alcohol, and scraper are not included in the package.

This kit combines the pulling bridge and eighteen attachments in one package, so you only need to add a hot glue gun and glue. Adjustable feet allow for the repair of dents of various sizes on doors, fenders, hoods, and roofs of cars. The metal is pulled gradually from the outside without sanding or filling. The attachments in six sizes cover small hail dents as well as larger impact dents. The kit is suitable for bodywork repairs at home or in the garage.

Price incl. VAT €32.27