LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · support in English · Contact Us

Home page Home page PC & Laptop Accessories PC Components CPU coolers and fans Cooling Pad for Graphics Card 85 x 45 x 1.75 mm with Conductivity 21 W/m.K Grey Cuttable for Laptop and Gaming Console
Cooling Pad for Graphics Card 85 x 45 x 1.75 mm with Conductivity 21 W/m.K Grey Cuttable for Laptop and Gaming Console

Cooling Pad for Graphics Card 85 x 45 x 1.75 mm with Conductivity 21 W/m.K Grey Cuttable for Laptop and Gaming Console

For gaps of 1.75 mm under the cooler of the graphics card, laptop, or console. Grey pad 85 x 45 mm with conductivity 21 W/m.K can be cut into pieces. Full description
In stock
Delivery €1.59
30-day return policy
€18.73
Safe shopping Safe shopping
Overview
Cooling Pad for Graphics Card 85 x 45 x 1.75 mm with Conductivity 21 W/m.K Grey Cuttable for Laptop and Gaming Console

The cooling pad for graphics cards with a thickness of 1.75 mm is used where there is a gap of less than two millimetres between the chip and the cooler. In addition to graphics cards, such a distance can also be found in laptops and gaming consoles, typically above the memory or power circuits. The pad with thermal conductivity of 21 W/m.K transfers heat from the components to the cooler, preventing it from being trapped in the air layer. The grey pad measuring 85 x 45 x 1.75 mm can be cut with scissors into pieces according to the shape of the chips. It is protected on both sides with a blue film.

  • Thickness 1.75 mm – the gap in the specific device is crucial when selecting. Measuring the original pad after removing the cooler or referring to the service manual will help ensure the cooler makes contact with all components simultaneously.
  • Dimension 85 x 45 mm – the rectangular area provides material for several smaller pieces for memory and transistors as well as a larger piece for bigger chips. Unused scraps can be stored for later repairs.
  • Heat Dissipation – conductivity of 21 W/m.K is designed for components that heat up significantly during gaming and prolonged load. The pad adapts to the surface and compensates for minor unevenness and height differences between chips.
  • Non-Conductive Material – the pad does not conduct electricity, and the parameter table states breakdown voltage of at least 9.8 kV per 1 mm. It can therefore be placed directly on components mounted on the printed circuit board.
  • Protective Film – the blue film on both sides keeps the surface clean during cutting and storage. It is removed only during assembly, first on the side facing the chip and then on the side facing the cooler, to prevent dust from settling on the surface.
  • Application – graphics cards, laptops, gaming consoles, M.2 SSD drives, processors, and chips on motherboards where the manufacturer anticipates a gap of 1.75 mm between the component and the cooler.

Package Contents:

  • 1x cooling pad 85 x 45 mm

The grey cooling pad 85 x 45 x 1.75 mm is useful for maintaining the cooling of a graphics card, laptop, or console when it is necessary to replace hardened or torn pads. After removing the cooler, the remnants of the old material are removed, and the surface of the chips is cleaned. The pad is then cut into the necessary pieces, the film is removed from each, the pieces are placed on the components, and the cooler is tightened again. Thickness 1.75 mm is intended for devices where the manufacturer accounts for this gap. Pieces for memory and power circuits as well as for other chips in the device can be prepared from one piece.

Delivery and Returns
Price incl. VAT €18.73