Home page Home page Hobbies & Garden Tools Drills & Accessories Drill Bits Cobalt Step Drill Bit for Metal 10.5 mm HSS M35 Spiral with Seven Steps Length 130 mm Cylindrical Shank For Steel and Stainless Steel
Cobalt Step Drill Bit for Metal 10.5 mm HSS M35 Spiral with Seven Steps Length 130 mm Cylindrical Shank For Steel and Stainless Steel

Cobalt Step Drill Bit for Metal 10.5 mm HSS M35 Spiral with Seven Steps Length 130 mm Cylindrical Shank For Steel and Stainless Steel

Step drill bit 10.5 mm made of HSS M35 steel with cobalt for drilling into iron, steel, and stainless steel. Length 130 mm and cylindrical shank for cordless and stationary drills. Full description
In stock
€22.66
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Cobalt Step Drill Bit for Metal 10.5 mm HSS M35 Spiral with Seven Steps Length 130 mm Cylindrical Shank For Steel and Stainless Steel

The step spiral drill bit for metal with a diameter of 10.5 mm is designed for drilling holes in metallic materials. It is made of high-speed steel HSS M35 with cobalt content, suitable for iron, structural steel, and stainless steel. At the tip, it features a point with seven small steps that gradually transition to the full diameter. The spiral groove removes chips from the hole during drilling. The diameter of 10.5 mm fills the gap between the common sizes of 10 mm and 11 mm.

The drill measures a total of 130 mm, and the spiral working part has a length of 86 mm. This allows it to handle sheets, strips, angles, and metal profiles. The cylindrical shank fits into the chuck of cordless drills, mains drills, and bench drills. The shape of the seven-step tip and the spiral progression are captured in detailed photographs.

Unlike a conventional spiral drill bit, the tip of this model consists of seven steps with increasing diameters. The smallest step first drills a narrow hole, and each subsequent step widens it slightly. The full diameter of 10.5 mm is only achieved after passing through all the steps. Thus, the hole is created in one step without pre-drilling with a thinner bit. The product photographs also show the traces of the steps in the wall of the hole.

  • Type – spiral drill bit with step tip
  • Diameter – 10.5 mm
  • Length of working part – 86 mm
  • Total length – 130 mm
  • Material – high-speed steel HSS M35 with cobalt content
  • Tip – seven steps gradually transitioning to full diameter
  • Shank – cylindrical
  • Use – drilling into iron, steel, and stainless steel
  • Contents of packaging – 1 piece of 10.5 mm step spiral drill bit

When drilling into steel and stainless steel, use cutting oil or coolant to reduce heat build-up at the tip. Adjust the speed according to the diameter of the drill bit and the hardness of the material, and guide the drill perpendicularly to the surface without excessive pressure. After use, clean the drill bit of chips and oil residues and store it in a case or separately from other tools. The diameter of 10.5 mm is useful for attaching metal brackets, hinges, and fasteners, drilling holes for screws and rivets in sheet metal parts, or for repairing frames, shelves, and garden furniture. The drill bit is also suitable for modifying strips and angles in a home workshop. Mark the centre of the hole beforehand with a centre punch to prevent the drill bit from slipping at the start.

The 10.5 mm step drill bit will find its use in the workshop, garage, and during DIY metalworking. Cobalt steel HSS M35 is capable of drilling into stainless steel. The seven-step tip gradually enlarges the hole to the full diameter. The cylindrical shank can be clamped into any standard drill. The packaging contains one drill bit with a diameter of 10.5 mm.

Price incl. VAT €22.66