Home page Home page Hobbies & Garden Tools Drills & Accessories Drill Bits Cobalt Step Drill Bit 3-13 mm HSS M35 Spiral Flute Hex Shank 6.35 mm Length 77 mm Brown For Stainless Steel Copper and Aluminium
Cobalt Step Drill Bit 3-13 mm HSS M35 Spiral Flute Hex Shank 6.35 mm Length 77 mm Brown For Stainless Steel Copper and Aluminium

Cobalt Step Drill Bit 3-13 mm HSS M35 Spiral Flute Hex Shank 6.35 mm Length 77 mm Brown For Stainless Steel Copper and Aluminium

Spiral step drill bit made of cobalt HSS M35 for holes from 3 to 13 mm in sheet metal, stainless steel and aluminium. The hex shank fits in a cordless drill. Full description
In stock
€10.87
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Cobalt Step Drill Bit 3-13 mm HSS M35 Spiral Flute Hex Shank 6.35 mm Length 77 mm Brown For Stainless Steel Copper and Aluminium

The step drill bit for metal is a practical assistant for anyone who needs to quickly and cleanly drill holes of various diameters with a single tool. This conical drill bit is made from high-speed steel HSS M35 with cobalt content, which withstands the heat generated when drilling harder materials well. The gradually widening steps allow you to create a hole in the range of 3 to 13 mm without the need to switch between several standard drill bits. The drill bit is suitable for thin sheets, profiles, tubes, and boards made of plastic. You will find it useful in the workshop, during installations, repairs, and DIY tasks at home.

The spiral flute helps to remove chips from the cutting area, so the drill bit binds less and the hole remains clean. The shank is hexagonal with a size of 6.35 mm (1/4"), which allows it to be clamped in a standard drill chuck as well as in a quick-release holder of a cordless screwdriver. The hex shape also prevents the tool from slipping in the chuck under higher loads. The total length of the drill bit is 77 mm, and the stepped part measures 47 mm. The diameters are marked on the individual steps, so you can easily tell when you have the desired size hole.

  • Type – step conical drill bit with spiral flute
  • Diameter range – 3 to 13 mm
  • Material – high-speed steel HSS M35 with cobalt content
  • Shank – hexagonal 6.35 mm (1/4")
  • Total length – 77 mm
  • Length of stepped part – 47 mm
  • Suitable materials – stainless steel, carbon steel, aluminium, copper, PVC, and wood
  • Compatibility – handheld electric drill, hammer drill, and pillar drill
  • Contents – 1 step drill bit 3-13 mm and plastic case

When drilling into metal, start at lower speeds and apply even pressure without sudden impacts. For steel and stainless steel, it is advisable to use cutting oil or another coolant, which reduces the heating of the cutting edges and extends the tool's lifespan. The sharp tip facilitates drilling even on smooth and rounded surfaces, where a standard drill bit might slip. After use, clean the drill bit of chips and store it in the plastic case, where it is protected from damage and moisture.

The cobalt step drill bit replaces a whole range of standard drill bits and saves time when changing tools. With one tool, you can drill a small pilot hole and in the same step gradually widen it up to diameter 13 mm, without pre-drilling and without searching for the correct size in a set. It is suitable for electricians, plumbers, locksmiths, and DIY enthusiasts who need to drill conduits for cables, holes for screws, or modifications to sheet metal covers. Thanks to the spiral flute and sturdy hexagonal shank, it works steadily in both handheld and pillar drills. The drill bit is supplied in a protective case, so you can always have it on hand in your tool kit. It is a useful addition to any workshop.

Price incl. VAT €10.87