Home page Home page Hobbies & Garden Tools Drills & Accessories Drill Bits Cobalt Step Drill Bit 3-12 mm HSS M35 Spiral Flute 10 Diameters Hex Shank 6.35 mm Bronze For Sheet Metal and Stainless Steel
Cobalt Step Drill Bit 3-12 mm HSS M35 Spiral Flute 10 Diameters Hex Shank 6.35 mm Bronze For Sheet Metal and Stainless Steel

Cobalt Step Drill Bit 3-12 mm HSS M35 Spiral Flute 10 Diameters Hex Shank 6.35 mm Bronze For Sheet Metal and Stainless Steel

Cobalt steel drill bit can drill and enlarge holes from 3 to 12 mm in sheet metal, aluminium, copper, or plastic. It can be clamped into a cordless drill, hammer drill, or pillar drill. Full description
In stock
€10.00
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Cobalt Step Drill Bit 3-12 mm HSS M35 Spiral Flute 10 Diameters Hex Shank 6.35 mm Bronze For Sheet Metal and Stainless Steel

The 3-12 mm step drill bit is a practical tool for drilling holes in thin materials, replacing several common drill bits in the workshop. It is made from high-speed steel with cobalt alloy HSS M35, which is why the shank is stamped with the designation CO. The conical shape with steps of 1 mm starts with a small diameter of 3 mm, allowing you to easily drill a hole without pre-drilling. By gradually immersing it, you can enlarge the hole up to 12 mm while also beveling its edge. The drill bit is suitable for electricians, plumbers, modellers, and DIY enthusiasts.

On the cone, you will find ten diameters from 3 to 12 mm, and larger steps are marked with numbers, indicating when to stop drilling. The helical spiral flute continuously removes chips from the hole, preventing the cutting edges from clogging and reducing heat build-up. The tip is self-centering and does not slip on smooth surfaces of sheet metal. The hex shank of 6.35 mm fits securely in the drill chuck and in quick-release bit holders, preventing slippage during use.

  • Type – step conical drill bit with spiral flute
  • Material – high-speed steel with cobalt HSS M35
  • Diameter Range – 3 to 12 mm in 10 steps of 1 mm
  • Total Length – 76 mm
  • Working Length – 52 mm
  • Shank – hexagonal 6.35 mm (1/4")
  • Suitable Materials – wood, PVC, aluminium, stainless steel, carbon steel, and copper
  • Use with Tools – handheld electric drill, hammer drill, and pillar drill
  • Colour – bronze
  • Contents – 1 step drill bit 3-12 mm in a plastic case with a blue lid

When drilling, hold the tool perpendicular to the surface to ensure the hole is round and its edge is straight. For harder metals and stainless steel, use lower speeds and only moderate pressure to prevent the cutting edges from overheating unnecessarily and to keep them sharp for longer. Gradually enlarge the hole and stop at the desired step. After finishing work, clean the drill bit of chips and store it back in the included plastic case, which protects it from damage and impacts.

The cobalt step drill bit 3-12 mm is an excellent choice for holes for cable glands, screws, rivets, and fasteners in metal boxes, distribution boards, profiles, or plastic sheets. The small initial diameter of 3 mm facilitates precise drilling, and the additional steps cover the most commonly used hole sizes. One drill bit thus replaces ten separate drill bits of various diameters in your tool bag, saving you time on changes. The short total length of 76 mm ensures good manoeuvrability even in a handheld cordless drill. Thanks to the hex shank 6.35 mm, it can also be clamped into a hammer drill or pillar drill in the workshop.

Price incl. VAT €10.00