LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Hobbies & Garden Tools Grinders & Accessories Cleaning Disc for Angle Grinder 125 mm Hole 22 mm Silicon Carbide Red Removal of Rust Paint and Old Coatings from Metal and Wood
Cleaning Disc for Angle Grinder 125 mm Hole 22 mm Silicon Carbide Red Removal of Rust Paint and Old Coatings from Metal and Wood
Cleaning Disc for Angle Grinder 125 mm Hole 22 mm Silicon Carbide Red Removal of Rust Paint and Old Coatings from Metal and Wood 1
Cleaning Disc for Angle Grinder 125 mm Hole 22 mm Silicon Carbide Red Removal of Rust Paint and Old Coatings from Metal and Wood 1
Cleaning Disc for Angle Grinder 125 mm Hole 22 mm Silicon Carbide Red Removal of Rust Paint and Old Coatings from Metal and Wood 2
Cleaning Disc for Angle Grinder 125 mm Hole 22 mm Silicon Carbide Red Removal of Rust Paint and Old Coatings from Metal and Wood 3
Cleaning Disc for Angle Grinder 125 mm Hole 22 mm Silicon Carbide Red Removal of Rust Paint and Old Coatings from Metal and Wood 4
Cleaning Disc for Angle Grinder 125 mm Hole 22 mm Silicon Carbide Red Removal of Rust Paint and Old Coatings from Metal and Wood 5

Cleaning Disc for Angle Grinder 125 mm Hole 22 mm Silicon Carbide Red Removal of Rust Paint and Old Coatings from Metal and Wood

Coarse abrasive disc made of silicon carbide for angle grinders. Quickly removes rust, old paint and varnish, and prepares metal surfaces for further painting. Full description
In stock
€21.35
Safe shopping Safe shopping
Overview
Cleaning Disc for Angle Grinder 125 mm Hole 22 mm Silicon Carbide Red Removal of Rust Paint and Old Coatings from Metal and Wood

The cleaning disc with a diameter of 125 mm and a central hole of 22 mm is designed for angle grinders and is used for removing rust, old paints, varnishes, and other surface contaminants. The abrasive layer of the disc is made of silicon carbide in an open coarse structure, which quickly grinds down the top layer and reveals a clean substrate. The disc is suitable for preparing metal parts before new painting, cleaning railings, fences, gates, garden furniture, or steel structures. It also helps in removing oxidation and adhesive residues from solid surfaces. It will be used by DIY enthusiasts, locksmiths, auto repairers, and craftsmen who need to quickly restore a clean surface without the use of chemical removers. The disc is mounted in the same way as standard grinding and cutting discs, so its replacement takes only a moment and does not require any special tools.

  • Diameter – 125 mm.
  • Central Hole – 22 mm for mounting on an angle grinder.
  • Thickness – 15 mm.
  • Material – silicon carbide.
  • Usage – removal of rust, paints, varnishes, oxidation, and adhesive residues.
  • Surfaces – metal, sheet metal, steel profiles, and structures.
  • Compatibility – angle grinders for discs with a diameter of 125 mm.
  • Colour – red.
  • Package Contents – 1 piece of cleaning disc 125 mm.

Before mounting, check that the diameter of the disc and central hole 22 mm match your grinder and that the grinder is designed for discs with a diameter of 125 mm. Securely tighten the disc with the clamping nut and let the grinder run briefly idle to verify smooth operation without wobbling. When working, guide the disc lightly and evenly over the surface, do not apply excessive pressure and let the abrasive work at its own pace. Excessive pressure unnecessarily increases disc wear and heating of the workpiece. When working with sheets and thin parts, use shorter strokes to prevent the material from overheating and deforming. Always use the protective cover of the grinder, safety goggles, gloves, and a respirator, as dust is generated and small particles of old paint may fly off during cleaning. Secure the workpiece firmly or place it on a stable surface and work in a well-ventilated area.

The 125 mm silicon carbide cleaning disc is a practical helper in renovating metal objects and preparing surfaces before painting. It is suitable for flat surfaces, edges, pipes, and profiles and makes work easier where manual sanding would take too long. With one disc, you can quickly prepare steel parts for new painting or further processing. The disc takes up minimal space in the workshop and, due to its standard size, can be easily fitted onto most grinders of the appropriate size. As a spare piece, it is worth having it always at hand to prevent work from stopping when the previous disc wears out. The result is a clean surface free of rust and old paint without the need for chemical products.

Price incl. VAT €21.35