LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Hobbies & Garden Tools Grinders & Accessories Cleaning Disc for Angle Grinder 115 mm Hole 22 mm Silicon Carbide Removal of Rust Paint and Old Coatings from Metal
Cleaning Disc for Angle Grinder 115 mm Hole 22 mm Silicon Carbide Removal of Rust Paint and Old Coatings from Metal
Cleaning Disc for Angle Grinder 115 mm Hole 22 mm Silicon Carbide Removal of Rust Paint and Old Coatings from Metal red
Cleaning Disc for Angle Grinder 115 mm Hole 22 mm Silicon Carbide Removal of Rust Paint and Old Coatings from Metal 1
Cleaning Disc for Angle Grinder 115 mm Hole 22 mm Silicon Carbide Removal of Rust Paint and Old Coatings from Metal 2
Cleaning Disc for Angle Grinder 115 mm Hole 22 mm Silicon Carbide Removal of Rust Paint and Old Coatings from Metal 3
Cleaning Disc for Angle Grinder 115 mm Hole 22 mm Silicon Carbide Removal of Rust Paint and Old Coatings from Metal 4
Cleaning Disc for Angle Grinder 115 mm Hole 22 mm Silicon Carbide Removal of Rust Paint and Old Coatings from Metal 5
Cleaning Disc for Angle Grinder 115 mm Hole 22 mm Silicon Carbide Removal of Rust Paint and Old Coatings from Metal 6
Cleaning Disc for Angle Grinder 115 mm Hole 22 mm Silicon Carbide Removal of Rust Paint and Old Coatings from Metal 7
Cleaning Disc for Angle Grinder 115 mm Hole 22 mm Silicon Carbide Removal of Rust Paint and Old Coatings from Metal 8
Cleaning Disc for Angle Grinder 115 mm Hole 22 mm Silicon Carbide Removal of Rust Paint and Old Coatings from Metal 9

Cleaning Disc for Angle Grinder 115 mm Hole 22 mm Silicon Carbide Removal of Rust Paint and Old Coatings from Metal

Coarse abrasive disc made of silicon carbide for angle grinders. Quickly removes rust, old paint, and varnish, preparing the metal surface for further painting. Full description
In stock
Colour:
€20.48
Safe shopping Safe shopping
Overview
Cleaning Disc for Angle Grinder 115 mm Hole 22 mm Silicon Carbide Removal of Rust Paint and Old Coatings from Metal

The cleaning disc with a diameter of 115 mm and a central hole of 22 mm is designed for angle grinders and is used for removing rust, old paints, varnishes, and other surface contaminants. The abrasive layer of the disc is made of silicon carbide in an open coarse structure, which quickly grinds away the top layer and reveals a clean substrate. The disc is suitable for preparing metal parts before a new coat of paint, cleaning railings, fences, gates, garden furniture, or steel structures. It also helps in removing oxidation and adhesive residues from solid surfaces. It will be used by DIY enthusiasts, locksmiths, auto repairers, and craftsmen who need to quickly restore a clean surface without the use of chemical removers. The disc is mounted just like standard grinding and cutting discs, so its replacement takes only a moment and does not require any special tools.

  • Diameter – 115 mm.
  • Central Hole – 22 mm for mounting on an angle grinder.
  • Thickness – 15 mm.
  • Material – silicon carbide.
  • Usage – removal of rust, paints, varnishes, oxidation, and adhesive residues.
  • Surfaces – metal, sheet metal, steel profiles, and structures.
  • Compatibility – angle grinders for discs with a diameter of 115 mm.
  • Colour – according to the selected variant.
  • Contents of the Package – 1 piece of cleaning disc 115 mm.

Before installation, check that the diameter of the disc and central hole 22 mm match your grinder and that the grinder is designed for discs with a diameter of 115 mm. Securely tighten the disc with the clamping nut and let the grinder run briefly idle to verify smooth operation without wobbling. When working, guide the disc lightly and evenly over the surface, do not press down hard, and let the abrasive work at its own pace. Excessive pressure unnecessarily increases wear on the disc and heating of the workpiece. When working with sheets and thin parts, use shorter strokes to prevent the material from overheating and deforming. Always use the grinder's protective cover, safety glasses, gloves, and a respirator, as dust and small particles of old paint are generated during cleaning. Firmly clamp the workpiece or place it on a stable surface and work in a well-ventilated area.

The 115 mm silicon carbide cleaning disc is a practical helper in renovating metal items and preparing surfaces before painting. It is suitable for flat surfaces, edges, pipes, and profiles, making work easier where hand sanding would take too long. With one disc, you can quickly prepare steel parts for new painting or further processing. The disc takes up minimal space in the workshop and, due to its standard size, can be easily mounted on most grinders of the appropriate size. As a spare piece, it is worth having it always on hand so that work does not stop when the previous disc wears out. The result is a clean surface free of rust and old paint without the need for chemical products.

Price incl. VAT €20.48