Home page Home page Home & Household Supplies Home electrical supplies Back boxes and blanking plates Branching Lever Connectors 10 pcs Quick Connector 1 Input and 3 Outputs for Wires 0.08 to 2.5 mm² 32 A 250 V Copper Contacts Screwless
Branching Lever Connectors 10 pcs Quick Connector 1 Input and 3 Outputs for Wires 0.08 to 2.5 mm² 32 A 250 V Copper Contacts Screwless

Branching Lever Connectors 10 pcs Quick Connector 1 Input and 3 Outputs for Wires 0.08 to 2.5 mm² 32 A 250 V Copper Contacts Screwless

Lever-operated branch connectors for splitting one wire into three without soldering. Copper contacts and a stainless steel spring hold each wire firmly in place. Full description
In stock
€12.62
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Branching Lever Connectors 10 pcs Quick Connector 1 Input and 3 Outputs for Wires 0.08 to 2.5 mm² 32 A 250 V Copper Contacts Screwless

The pack contains ten lever-operated branch connectors for quickly splitting one wire into three outputs. The incoming wire is inserted from one side and the three outgoing wires from the opposite side, with each wire secured by its own lever. The connectors are rated for a current of 32 A and a voltage of 250 V. They are therefore suitable for lighting circuits, socket circuits and wiring small appliances. Installation requires no soldering, screwing or insulating tape.

Inside each connector are copper contacts with good conductivity and corrosion resistance. A flexible stainless steel spring clamp presses against the wires and holds the connection firmly, even after the levers have been opened repeatedly. The housing is made from flame-retardant plastic with increased resistance to high temperatures. The connector accepts wires with a cross-section of 0.08 to 2.5 mm², including solid single-core wires and flexible stranded wires.

The branching design replaces bulkier terminal blocks and the practice of connecting several wires under one screw. Each wire has its own opening and lever, so you can disconnect one output without affecting the others. The connector is suitable for connecting three lights to one switch, distributing a neutral or earth wire in several directions, or adding more appliances to an existing circuit. There is a small eyelet with a hole on the side of the housing.

  • Type – lever-operated branch connector with one input and three outputs
  • Rated current – 32 A
  • Rated voltage – 250 V
  • Wire cross-section – 0.08 to 2.5 mm²
  • Dimensions – 29.5 x 17.8 x 13.3 mm
  • Contacts – copper
  • Spring – stainless steel
  • Housing – flame-retardant plastic with increased heat resistance
  • Operation – separate lever for each of the four wires
  • Pack contents – 10 branch lever connectors

Installation is easy even for less experienced DIYers. First, strip the insulation from the end of the wire, then lift the lever and insert the stripped end into the opening as far as it will go. Finally, fold the lever back down to secure the wire. Connect all three output wires in the same way. To disconnect the connection, simply lift the lever again and pull out the wire. Always disconnect the power supply before working on electrical wiring, and make sure no bare wire protrudes from the connector housing.

The pack of ten is suitable for small electrical wiring jobs in a flat, garage or holiday home. The connectors with copper contacts provide reliable wire branching without tools and can be reused. The compact housing, measuring 29.5 x 17.8 x 13.3 mm, fits even in smaller junction boxes, keeping connections neat and tidy. Simple lever operation saves time with every connection. A practical solution for electricians, maintenance workers and experienced DIYers.

Price incl. VAT €12.62