Home page Home page Photo, Audio-Video & TV Hi-Fi Amplifiers Bluetooth 5.0 stereo amplifier XY-C100L 2 x 100 W Board with cover 58 x 53 x 18 mm AUX USB and mobile app Black for DIY speakers
Bluetooth 5.0 stereo amplifier XY-C100L 2 x 100 W Board with cover 58 x 53 x 18 mm AUX USB and mobile app Black for DIY speakers

Bluetooth 5.0 stereo amplifier XY-C100L 2 x 100 W Board with cover 58 x 53 x 18 mm AUX USB and mobile app Black for DIY speakers

Powerful dual-channel amplifier up to 100 W per channel with 24 V power supply, Bluetooth playback, AUX input, USB sound card and app control. Full description
In stock
€30.52
Price incl. VATImport charges will apply
Safe shopping Safe shopping
Overview
Bluetooth 5.0 stereo amplifier XY-C100L 2 x 100 W Board with cover 58 x 53 x 18 mm AUX USB and mobile app Black for DIY speakers

The more powerful XY-C100L Bluetooth amplifier is a two-channel stereo module designed for more demanding passive speakers and home projects. With a 24 V power supply, it delivers up to 2 x 100 W into 4 Ω, so it can drive even larger bookshelf or floor-standing speaker systems. The board is protected by a black cover measuring 58 x 53 x 18 mm, with a metal rotary knob protruding from the side for smooth volume adjustment. It connects to a phone or tablet via Bluetooth 5.0, with a range of up to 15 m.

As well as wireless streaming, it plays music from a USB flash drive formatted to FAT32 with a capacity of up to 32 GB, from a source connected by cable to the 3.5 mm AUX input, or from a computer, where it works as a plug-and-play sound card when connected via USB cable. The audio source, volume and playback can also be controlled using the mobile app for Android and iOS. In addition to screw terminals for passive speakers, the amplifier also has a 3.5 mm output for connecting active speakers.

  • Model – XY-C100L
  • Number of channels – 2 channels (stereo)
  • Output at 12 V – 2 x 12 W into 8 Ω and 2 x 22 W into 4 Ω
  • Output at 19 V – 2 x 28 W into 8 Ω and 2 x 55 W into 4 Ω
  • Output at 24 V – 2 x 51 W into 8 Ω and 2 x 100 W into 4 Ω
  • Suitable speakers – impedance 4 Ω or 8 Ω, power 20 to 300 W
  • Power supply – DC 5 to 26 V, 5.5 x 2.1 mm connector
  • Bluetooth – version 5.0, range up to 15 m in unobstructed conditions
  • Audio sources – Bluetooth, 3.5 mm AUX, USB flash drive, USB sound card
  • Controls – rotary knob, short press for play and pause, long press to switch on and off
  • Protection – reverse polarity, short circuit, overheating with automatic recovery
  • Dimensions – 58 x 53 x 18 mm without knob
  • Package contents – amplifier board with rotary knob, upper and lower covers with mounting hardware, heatsink and DC connector to screw terminal adapter

The amplifier’s output increases with the power supply voltage. For full performance, a 24 V power adapter with sufficient current capacity is recommended, but the voltage must not exceed 26 V. The power supply should have a higher power rating than the amplifier itself; otherwise, sound quality will deteriorate. If the sound cuts out during loud playback, a more powerful power supply, better heat dissipation or a lower volume may help. The Bluetooth antenna is mounted on the board, so do not place the amplifier on metal surfaces.

The XY-C100L amplifier is a good choice for anyone who needs more power than smaller modules offer and wants to drive larger passive speakers without an expensive receiver. It is suitable for the living room, workshop, holiday home or a DIY speaker cabinet. Its wide 5 to 26 V power supply range allows you to use a standard adapter, while Bluetooth, the AUX input and USB playback support most common music sources. Built-in overheating and short-circuit protection help ensure safe operation.

Price incl. VAT €30.52